Other Parts Discussed in Thread: TVP5158, PCF8575, PMP
hi,
i want to do a test about capture 4 ch D1 video(1 pecs TVP5158) then encode them,now i use link like this:
SYSTEM_LINK_ID_CAPTURE -> SYSTEM_LINK_ID_DEI_HQ_0 -> SYSTEM_LINK_ID_IPC_FRAMES_OUT_0 ->
SYSTEM_VPSS_LINK_ID_IPC_OUT_M3_0 -> SYSTEM_VIDEO_LINK_ID_IPC_IN_M3_0 -> SYSTEM_LINK_ID_VENC_0 ->
SYSTEM_VIDEO_LINK_ID_IPC_BITS_OUT_0 -> SYSTEM_HOST_LINK_ID_IPC_BITS_IN_0
but run this app,it seems not work right, is there any mistake?
hw:DM8168 EVM + VS_DC sw: DVR RDK 4.0
log is shown in below:
U-Boot 2010.06 (Jun 16 2013 - 23:06:43)
TI8168-GP rev 2.0
HDVICP clk : 600MHz
L3 Fast clk : 549MHz
HDVPSS clk : 274MHz
Ducati M3 clk : 274MHz
DSP clk : 1000MHz
ARM clk : 1200MHz
DDR clk : 531MHz
------------ PLL Settings --------------
MAIN_N : 56, MAIN_P: 1, OSC_FREQ: 27, FAPLL_K: 8
MAIN_INTFREQ1 : 0xC, MAIN_FRACFREQ1: 0x189374, MAIN_MDIV1: 0x1
MAIN_INTFREQ2 : 0xA, MAIN_FRACFREQ2: 0x147AE1, MAIN_MDIV2: 0x1
MAIN_INTFREQ3 : 0xA, MAIN_FRACFREQ3: 0x147AE1, MAIN_MDIV3: 0x2
MAIN_INTFREQ4 : 0xB, MAIN_FRACFREQ4: 0x0, MAIN_MDIV4: 0x2
MAIN_INTFREQ5 : 0xC, MAIN_FRACFREQ5: 0x189374, MAIN_MDIV5: 0x8
MAIN_MDIV6 : 0x3F
MAIN_MDIV7 : 0x4
--------- DDR PLL ----------
DDR_N : 0x3B
DDR_P : 0x1
DDR_MDIV1 : 0x3
DDR_INTFREQ2 : 0x8
DDDDR_FRACFREQ2R_N : 0xD99999
DDR_MDIV2 : 0x1E
DDR_INTFREQ3 : 0x8
DDR_FRACFREQ3 : 0x0
DDR_MDIV3 : 0x4
DDR_INTFREQ4 : 0xE
DDR_FRACFREQ4 : 0x0
DDR_MDIV4 : 0x4
DDR_INTFREQ5 : 0xE
DDR_FRACFREQ5 : 0x0
DDR_MDIV5 : 0x4
----------EMIF Timings (identical for 0 & 1)-------
EMIF_TIM1 : 0x0CCCE524
EMIF_TIM2 : 0x30308023
EMIF_TIM3 : 0x009F82CF
EMIF_SDREF : 0x10000C30
EMIF_SDCFG : 0x62A41032
EMIF_PHYCFG : 0x0000010B
----------SW LEVEL Info (EMIF 0) -------
RD_DQS_GATE_BYTE_LANE0: 0x0000012A
RD_DQS_GATE_BYTE_LANE1: 0x0000012A
RD_DQS_GATE_BYTE_LANE2: 0x0000012A
RD_DQS_GATE_BYTE_LANE3: 0x0000012A
WR_DQS_RATIO_BYTE_LANE0: 0x000000A6
WR_DQS_RATIO_BYTE_LANE1: 0x000000A6
WR_DQS_RATIO_BYTE_LANE2: 0x000000A6
WR_DQS_RATIO_BYTE_LANE3: 0x000000A6
RD_DQS_RATIO_BYTE_LANE0: 0x0000003B
RD_DQS_RATIO_BYTE_LANE1: 0x0000003B
RD_DQS_RATIO_BYTE_LANE2: 0x0000003B
RD_DQS_RATIO_BYTE_LANE3: 0x0000003B
WR_DATA_RATIO_BYTE_LANE0: 0x000000E6
WR_DATA_RATIO_BYTE_LANE1: 0x000000E6
WR_DATA_RATIO_BYTE_LANE2: 0x000000E6
WR_DATA_RATIO_BYTE_LANE3: 0x000000E6
----------SW LEVEL Info (EMIF 1) -------
RD_DQS_GATE_BYTE_LANE0: 0x0000012A
RD_DQS_GATE_BYTE_LANE1: 0x0000012A
RD_DQS_GATE_BYTE_LANE2: 0x0000012A
RD_DQS_GATE_BYTE_LANE3: 0x0000012A
WR_DQS_RATIO_BYTE_LANE0: 0x000000A6
WR_DQS_RATIO_BYTE_LANE1: 0x000000A6
WR_DQS_RATIO_BYTE_LANE2: 0x000000A6
WR_DQS_RATIO_BYTE_LANE3: 0x000000A6
RD_DQS_RATIO_BYTE_LANE0: 0x0000003B
RD_DQS_RATIO_BYTE_LANE1: 0x0000003B
RD_DQS_RATIO_BYTE_LANE2: 0x0000003B
RD_DQS_RATIO_BYTE_LANE3: 0x0000003B
WR_DATA_RATIO_BYTE_LANE0: 0x000000E6
WR_DATA_RATIO_BYTE_LANE1: 0x000000E6
WR_DATA_RATIO_BYTE_LANE2: 0x000000E6
WR_DATA_RATIO_BYTE_LANE3: 0x000000E6
I2C: ready
DRAM: 1 GiB
NAND: HW ECC BCH8 Selected
256 MiB
MMC: OMAP SD/MMC: 0
:,;;:;:;;;;;;;;r;;:,;;:;:;;;;;;;;:,;;:;:;;;;;;;;:,;;:;:;;;;;;;;:;;;;;;;;:,;;:;:
;,;:::;;;;r;;;rssiSiS552X5252525259GX2X9hX9X9XX2325S55252i5:,;;:;:;;;;;;;;:,;;:
;:;;;;;;;rrssSsS52S22h52299GGAAMHMM#BBH#B#HMM#HMBA&&XX2255S2S5Si:,;;:;:;;;;;;;;
;:;;r;;rsrrriiXS5S329&A&MH#BMB#A&9XXA252GXiSXX39AAMMMBB&G22S5i2SSiiiisi:,;;:;:;
;;;;;r;rr2iisiih393HB#B#AA99i22irrrX3X52AGsisss2Xii2299HBMA&X2S5S5iSiisSsi:,;;:
r:r;rrsrsihXSi2&##MHB&Ahh3AGHGA9G9h&#H##@@@##MAMMXXX9SSS29&&HGGX2i5iisiiisisi:,
;;rrrrsSiiiA&ABH&A9GAGhAhBAMHA9HM@@@@@@@@@@@@@@@@@@@HHhAh2S2SX9&Gh22SSiisiiisii
r:rrssisiS2XM##&h3AGAX&3GG3Ssr5H@M#HM2; ;2X&&&MHMB###GBB#B&XXSSs529XX55iSsisisi
r;rsrisSi2XHAhX99A3XXG&&XS;:,rH#HGhAS @@@@3rs2XBM@@A552&&AHA2XiisSS252SSsisSs
r;issi5S22&&3iSSX292&hXsr;;:;h@&G339&S9@@@@2@MA&9&HB##Xris29ABMAAX2ir;rsSi5iss5
rrsSi2XhG&9GXh399&X99i;;;;;;r#H&293H9X#@@@@@@@B&9GhAH@XrrsrsiXABHB&HG2rr;rrSiSi
;:rsisS599&AA9XG&3A35r;:::;,;BMh&&2iX5A@@@@@@@&392X5GB2;;;r;iSX393A##A&Xi:::rsi
;:rss552222X553&XHMhir;;::,:,h#HhGSXhG3#@@@@#AXXS2XAHA;::;;;;ss55XShBA3239r:,;;
r;ii2S5SSi2i53hirsh2srr::,,,,;MMXX359&Ah3h&Si59SX99A#i:,::::;;sri2,.2r;:SGAr;,:
;:;rrrrssiriXGSi::shs;;;,,,:,,rBBA9h5s5h5iS5isi2SAHB5:,,,:::;rrs5&SrisSX5Srrr:,
;,r;;;;rsriSSrrrr;;5Xrr;;,:,,.,;9AA2SsisS5323XXXG9&i:.,,::;;r;;;srrrrrr;;:;::::
:,;r;r;rrissrrr;:;::;s;;;;,:,,..,r293h222hXXAAGGGX;:,,,:,:,::;:;::,:,,,,...,,,,
;,;;;;rrrrrrrrirr;,.,,:::::::,,,,.,;SX&ABAB2hhXir:,,.,,.,,:,,,,..,,,..,..,,,..:
:.:;:;;;:;;;;r;rrs;:.. ,,:::::,:,:,,.::rrsrr;;,,.......,..,....,,,,,,,...,.,,:,
:.:::,::::::;;r;rrr;:.......,.,.,,:::,,...............,,::.,,,,:,::,,:,:,,,:,;:
,.::,:,,,,,;;;;;;;;r;;::,..............................;;;:;::::,:::::::,:,:,,,
: ,,:,,,,,,,,,,,,,:;rrr;;:;,,,,,,,::,.,.:.,.,;s,:;;;;:;:;;;;;::::,:::,:::,:,:,:
,.,,,,,,,...,,.,,....................................:,............:,,,:,:,,,,,
Net: Detected MACID:aa:bb:cc:dd:ee:ff
Ethernet PHY: GENERIC @ 0x01
DaVinci EMAC
Hit any key to stop autoboot: 0
NAND read: device 0 offset 0x580000, size 0x300000
3145728 bytes read: OK
## Booting kernel from Legacy Image at 81000000 ...
Image Name: Linux-2.6.37
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2569084 Bytes = 2.5 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Linux version 2.6.37 (x0161644@bangvideoapps01) (gcc version 4.5.3 20110311 (prerelease) (GCC) ) #1 Fri May 3 18:24:18 IST 2013
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: ti8168evm
vram size = 41943040 at 0x0
ti81xx_reserve: ### Reserved DDR region @8ff00000
reserved size = 41943040 at 0x0
FB: Reserving 41943040 bytes SDRAM for VRAM
Memory policy: ECC disabled, Data cache writeback
OMAP chip is TI8168 2.0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 54528
Kernel command line: mem=256M console=ttyO2,115200n8 root=/dev/nfs rw nfsroot=192.168.0.104:/usr/local/DM8168/dvr/DVRRDK_04.00.00.03/target/rfs_816x ip=192.168.0.243:192.168.0.104:192.168.0.1:255.255.255.0::eth0:off vram=40M notifyk.vpssm3_sva=0xBEE00000 ddr_mem=1024M
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 214MB 1MB = 215MB total
Memory: 212344k/212344k available, 49800k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB)
lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.init : 0xc0008000 - 0xc0041000 ( 228 kB)
.text : 0xc0041000 - 0xc04e2000 (4740 kB)
.data : 0xc04e2000 - 0xc052c280 ( 297 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:407
IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
Total of 128 interrupts on 1 active controller
GPMC revision 6.0
Trying to install interrupt handler for IRQ400
Trying to install interrupt handler for IRQ401
Trying to install interrupt handler for IRQ402
Trying to install interrupt handler for IRQ403
Trying to install interrupt handler for IRQ404
Trying to install interrupt handler for IRQ405
Trying to install interrupt handler for IRQ406
Trying to install type control for IRQ407
Trying to set irq flags for IRQ407
OMAP clockevent source: GPTIMER1 at 27000000 Hz
Console: colour dummy device 80x30
Calibrating delay loop... 1199.30 BogoMIPS (lpj=5996544)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
devtmpfs: initialized
TI81XX: Map 0x8ff00000 to 0xfe500000 for dram barrier
TI81XX: Map 0x40300000 to 0xfe600000 for sram barrier
omap_voltage_early_init: voltage driver support not added
regulator: core version 0.5
regulator: dummy:
NET: Registered protocol family 16
omap_voltage_domain_lookup: Voltage driver init not yet happened.Faulting!
omap_voltage_add_dev: VDD specified does not exist!
OMAP GPIO hardware version 0.1
OMAP GPIO hardware version 0.1
omap_mux_init: Add partition: #1: core, flags: 0
_omap_mux_get_by_name: Could not find signal i2c2_scl.i2c2_scl
_omap_mux_get_by_name: Could not find signal i2c2_sda.i2c2_sda
NOR: Can't request GPMC CS
registered ti816x_gpio_vr device
registered ti816x_sr device
Cannot clk_get ck_32
pm_dbg_init: only OMAP3 supported
registered ti81xx_vpss device
registered ti81xx_vidout device
registered ti81xx on-chip HDMI device
registered ti81xx_fb device
registered ti81xx_vin device
ti81xx_pcie: Invoking PCI BIOS...
ti81xx_pcie: Setting up Host Controller...
ti81xx_pcie: Register base mapped @0xd0820000
ti81xx_pcie: Starting PCI scan...
PCI: bus0: Fast back to back transfers enabled
ti81xx_pcie: PCI scan done.
bio: create slab <bio-0> at 0
regulator: VFB: 800 <--> 1025 mV at 1010 mV
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USBSS revision 4ea20809
registerd cppi-dma Intr @ IRQ 17
Cppi41 Init Done
omap_i2c omap_i2c.1: bus 1 rev4.0 at 100 kHz
I2C: Read failed at pcf8575_cir_enable 670 with error code: -121
I2C: Transfer failed at pcf8575_cir_enable 676 with error code: -121
omap_i2c omap_i2c.2: bus 2 rev4.0 at 100 kHz
Advanced Linux Sound Architecture Driver Version 1.0.23.
Switching to clocksource gp timer
musb-hdrc: version 6.0, host, debug=0
musb-hdrc musb-hdrc.0: dma type: dma-cppi41
MUSB controller-0 revision 4ea20800
musb-hdrc musb-hdrc.0: MUSB HDRC host driver
musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 1
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: MUSB HDRC host driver
usb usb1: Manufacturer: Linux 2.6.37 musb-hcd
usb usb1: SerialNumber: musb-hdrc.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
musb-hdrc musb-hdrc.0: USB Host mode controller at d081e000 using DMA, IRQ 18
musb-hdrc musb-hdrc.1: dma type: dma-cppi41
MUSB controller-1 revision 4ea20800
musb-hdrc musb-hdrc.1: MUSB HDRC host driver
musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: MUSB HDRC host driver
usb usb2: Manufacturer: Linux 2.6.37 musb-hcd
usb usb2: SerialNumber: musb-hdrc.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
musb-hdrc musb-hdrc.1: USB Host mode controller at d0826800 using DMA, IRQ 19
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NetWinder Floating Point Emulator V0.97 (double precision)
PMU: registered new PMU device of type 0
omap-iommu omap-iommu.0: ducati registered
omap-iommu omap-iommu.1: sys registered
JFFS2 version 2.2. (NAND) 漏 2001-2006 Red Hat, Inc.
msgmni has been set to 414
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
omap_uart.0: ttyO0 at MMIO 0x48020000 (irq = 72) is a OMAP UART0
omap_uart.1: ttyO1 at MMIO 0x48022000 (irq = 73) is a OMAP UART1
omap_uart.2: ttyO2 at MMIO 0x48024000 (irq = 74) is a OMAP UART2
console [ttyO2] enabled
brd: module loaded
loop: module loaded
ahci probe: devid name is ahci
ahci CAP register dump =0x6726ff81
Modified ahci CAP register dump =0x6f26ff81
ahci ahci.0: forcing PORTS_IMPL to 0x3
ahci: SSS flag set, parallel bus scan disabled
ahci ahci.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl platform mode
ahci ahci.0: flags: ncq sntf stag pm led clo only pmp pio slum part ccc
scsi0 : ahci_platform
scsi1 : ahci_platform
ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a150fff] port 0x100 irq 16
ata2: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a150fff] port 0x180 irq 16
m25p80 spi1.0: found m25p05-nonjedec, expected m25p80
m25p80 spi1.0: m25p05-nonjedec (64 Kbytes)
Creating 4 MTD partitions on "spi_flash":
0x000000000000-0x000000040000 : "U-Boot"
mtd: partition "U-Boot" extends beyond the end of device "spi_flash" -- size truncated to 0x10000
0x000000010000-0x000000012000 : "U-Boot Env"
mtd: partition "U-Boot Env" is out of reach -- disabled
0x000000000000-0x000000280000 : "Kernel"
mtd: partition "Kernel" extends beyond the end of device "spi_flash" -- size truncated to 0x10000
0x000000010000-0x000000010000 : "File System"
mtd: partition "File System" is out of reach -- disabled
omap2-nand driver initializing
davinci_mdio davinci_mdio.0: davinci mdio revision 1.6
davinci_mdio davinci_mdio.0: detected phy mask fffffffd
davinci_mdio.0: probed
davinci_mdio davinci_mdio.0: phy[1]: device 0:01, driver unknown
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver dm9601
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
omap_rtc omap_rtc: rtc core: registered omap_rtc as rtc0
i2c /dev entries driver
Linux video capture interface: v2.00
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
notify_init : notify drivercreated for remote proc id 2 at physical Address 0xbee00000
usbcore: registered new interface driver snd-usb-audio
Registered tvp5158 audio codec
asoc: tvp5158-hifi <-> davinci-mcasp.0 mapping ok
asoc: tlv320aic3x-hifi <-> davinci-mcasp.2 mapping ok
asoc: HDMI-DAI-CODEC <-> hdmi-dai mapping ok
ALSA device list:
#0: TI81XX SOUND0
#1: TI81XX SOUND1
TCP cubic registered
NET: Registered protocol family 17
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
omap_voltage_late_init: Voltage driver support not added
Power Management for TI81XX.
smartreflex smartreflex: Driver initialized
omap_rtc omap_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
davinci_mdio davinci_mdio.0: resetting idled controller
net eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, id=282f014)
IP-Config: Complete:
device=eth0, addr=192.168.0.243, mask=255.255.255.0, gw=192.168.0.1,
host=192.168.0.243, domain=, nis-domain=(none),
bootserver=192.168.0.104, rootserver=192.168.0.104, rootpath=
PHY: 0:01 - Link is Up - 100/Full
ata1: COMRESET failed (errno=-32)
ata1: limiting SATA link speed to 1.5 Gbps
ata1: SATA link down (SStatus 0 SControl 310)
ata2: SATA link down (SStatus 0 SControl 300)
VFS: Mounted root (nfs filesystem) on device 0:15.
devtmpfs: mounted
Freeing init memory: 228K
INIT: version 2.88 booting
Mounting /dev/shm : Mounting /dev/pts : Mounting other filesystems : Mounting /dev/sda1 : mount: mounting /dev/sda1 on /media/sda1 failed: No such file or directory
Mounting /dev/sda2 : mkdir: can't create directory '/media': File exists
mkdir: can't create directory '/media/sda2': File exists
mount: mounting /dev/sda2 on /media/sda2 failed: No such file or directory
Sync command ...Error opening /dev/fb0: No such file or directory
Starting udev
udev[71]: starting version 164
Starting Bootlog daemon: bootlogd.
Applying sync command
_____ _____ _ _
| _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_
| | _| .'| . | . | | __| _| . | | | -_| _| _|
|__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_|
|___| |___|
Arago Project http://arago-project.org dm816x ttyO2
Arago 2012.10 dm816x ttyO2
dm816x login: root
root@dm816x:~# cd /opt/dvr_rdk/ti816x/
root@dm816x:/opt/dvr_rdk/ti816x# ./init.sh
*** Bootargs Validated for mem param ***
*** Bootargs Validated for notifyk.vpssm3 params ***
*** Kernel Base address validated ***
Kernel bootargs validated
numid=101,iface=MIXER,name='Left DAC Mux'
; type=ENUMERATED,access=rw------,values=1,items=3
; Item #0 'DAC_L1'
; Item #1 'DAC_L3'
; Item #2 'DAC_L2'
: values=2
numid=99,iface=MIXER,name='Right DAC Mux'
; type=ENUMERATED,access=rw------,values=1,items=3
; Item #0 'DAC_R1'
; Item #1 'DAC_R3'
; Item #2 'DAC_R2'
: values=2
[c6xdsp ] Remote Debug Shared Memory @ 0xbf000000
[m3video] Remote Debug Shared Memory @ 0xbf010820
[m3vpss ] Remote Debug Shared Memory @ 0xbf021040
SysLink version : 2.20.02.20
SysLink module created on Date:Jun 16 2013 Time:19:16:18
Trace enabled
Trace SetFailureReason enabled
Setting DMM priority for [DUCATI ] to [0] ( 0x4e000624 = 0x08000000 )
Setting DMM priority for [HDVICP0 ] to [2] ( 0x4e000634 = 0x0000000a )
Setting DMM priority for [HDVICP1 ] to [2] ( 0x4e000634 = 0x000a0000 )
Setting DMM priority for [HDVICP2 ] to [2] ( 0x4e000634 = 0x00a00000 )
*** TVP5158 probe : START ***
TI VS EVM : TVP5158 device address : 0x58, 0x5a, 0x5c, 0x5e
TI DVR : TVP5158 device address : 0x5c, 0x5d, 0x5e, 0x5f
Device found : I2C (0xXX): 0x08 = 0x51
I2C (0xXX): 0x09 = 0x58
Device NOT found : I2C (0xXX): Read ERROR !!! (reg[0x08], count = 2)
I2C (0x58): 0x08 = 0x51
I2C (0x58): 0x09 = 0x58
I2C (0x5a): 0x08 = 0x51
I2C (0x5a): 0x09 = 0x58
I2C (0x5c): Read ERROR !!! (reg[0x08], count = 2)
I2C (0x5d): Read ERROR !!! (reg[0x08], count = 2)
I2C (0x5e): 0x08 = 0x51
I2C (0x5e): 0x09 = 0x58
I2C (0x5f): Read ERROR !!! (reg[0x08], count = 2)
*** TVP5158 probe : END ***
/opt/dvr_rdk/ti816x
root@dm816x:/opt/dvr_rdk/ti816x# ./load.sh
Attached to slave procId 2.
Loaded file ../firmware/dvr_rdk_fw_m3vpss_1024M_256M.xem3 on slave procId 2.
Started slave procId 2.
After Ipc_loadcallback status [0x00000000]
[m3vpss ] ***** VPSS Firmware build time 19:30:04 Jun 16 2013 EDG gcc 3.0 mode
[m3vpss ] ***** SYSTEM : Frequency <ORG> - 250000000, <NEW> - 274909088
[m3vpss ] Seth Custom
[m3vpss ] notify_attach rtnVal 0
[m3vpss ] initProxyServer rtnVal 0
[m3vpss ]
[m3vpss ] *** UTILS: CPU KHz = 549818 Khz ***
[m3vpss ]
[m3vpss ] 36: SYSTEM : System Common Init in progress !!!
[m3vpss ] 36: SYSTEM: IPC init in progress !!!
[m3vpss ] 36: SYSTEM: Attaching to [HOST] ...
[m3vpss ] 38: SYSTEM: Attaching to [HOST] ... SUCCESS !!!
After Ipc_startcallback status [0x00000000]
Attached to slave procId 1.
Loaded file ../firmware/dvr_rdk_fw_m3video_1024M_256M.xem3 on slave procId 1.
Started slave procId 1.
After Ipc_loadcallback status [0x00000000]
[m3video] ***** VIDEO Firmware build time 19:31:15 Jun 16 2013 EDG gcc 3.0 mode
[m3video] ***** SYSTEM : Frequency <ORG> - 250000000, <NEW> - 274909088
[m3video]
[m3video] *** UTILS: CPU KHz = 549818 Khz ***
[m3video]
[m3video] 432: SYSTEM : System Common Init in progress !!!
[m3video] 432: SYSTEM: IPC init in progress !!!
[m3video] 432: SYSTEM: Attaching to [HOST] ...
[m3video] 434: SYSTEM: Attaching to [HOST] ... SUCCESS !!!
After Ipc_startcallback status [0x00000000]
Attached to slave procId 0.
Loaded file ../firmware/dvr_rdk_fw_c6xdsp_1024M_256M.xe674 on slave procId 0.
Started slave procId 0.
After Ipc_loadcallback status [0x00000000]
[c6xdsp ] ***** VIDEO Firmware build time 19:28:07 Jun 16 2013 EDG gcc 3.0 mode
[c6xdsp ] ***** SYSTEM : Frequency <ORG> - 800000000, <NEW> - 1000000000
[c6xdsp ]
[c6xdsp ] *** UTILS: CPU KHz = 1000000 Khz ***
[c6xdsp ]
[c6xdsp ] 5: SYSTEM : System Common Init in progress !!!
[c6xdsp ] 5: SYSTEM: IPC init in progress !!!
[c6xdsp ] 5: SYSTEM: Attaching to [HOST] ...
[c6xdsp ] 8: SYSTEM: Attaching to [HOST] ... SUCCESS !!!
After Ipc_startcallback status [0x00000000]
[c6xdsp ] 11: SYSTEM: Attaching to [VIDEO-M3] ... SUCCESS !!!
[m3video] 617: SYSTEM: Attaching to [DSP] ... SUCCESS !!!
[m3vpss ] 619: SYSTEM: Attaching to [DSP] ... SUCCESS !!!
[c6xdsp ] 13: SYSTEM: Attaching to [VPSS-M3] .DMA: Module install successful, device major num = 251
.. SUCCESS !!!
DRV: Module install successful
[m3video] 621:DRV: Module built on Jun 16 2013 19:16:44
SYSTEM: Attaching to [VPSS-M3] ... SUCCESS !!!
[m3vpss ] 621: SYSTEM: Attaching to [VIDEO-M3] ... SUCCESS !!!
[c6xdsp ] 13: SYSTEM: Creating MsgQ Heap [IPC_MSGQ_MSG_HEAP_0] ...
[m3video] 621: SYSTEM: Creating MsgQ Heap [IPC_MSGQ_MSG_HEAP_1] ...
[m3vpss ] 621: SYSTEM: Creating MsgQ Heap [IPC_MSGQ_MSG_HEAP_2] ...
[c6xdsp ] 13: SYSTEM: Creating MsgQ [DSP_MSGQ] ...
[m3video] 622: SYSTEM: Creating MsgQ [VIDEO-M3_MSGQ] ...
[m3vpss ] 622: SYSTEM: Creating MsgQ [VPSS-M3_MSGQ] ...
[c6xdsp ] 13: SYSTEM: Creating MsgQ [DSP_ACK_MSGQ] ...
[m3video] 622: SYSTEM: Creating MsgQ [VIDEO-M3_ACK_MSGQ] ...
[m3vpss ] 622: SYSTEM: Creating MsgQ [VPSS-M3_ACK_MSGQ] ...
[c6xdsp ] 14: SYSTEM: Notify register to [HOST] line 0, event 15 ...
[m3video] 623: SYSTEM: Notify register to [HOST] line 0, event 15 ...
[m3vpss ] 623: SYSTEM: Notify register to [HOST] line 0, event 15 ...
[c6xdsp ] 14: SYSTEM: Notify register to [VIDEO-M3] line 0, event 15 ...
[m3video] 624: SYSTEM: Notify register to [DSP] line 0, event 15 ...
[m3vpss ] 624: SYSTEM: Notify register to [DSP] line 0, event 15 ...
[c6xdsp ] 14: SYSTEM: Notify register to [VPSS-M3] line 0, event 15 ...
[m3video] 624: SYSTEM: Notify register to [VPSS-M3] line 0, event 15 ...
[m3vpss ] 624: SYSTEM: Notify register to [VIDEO-M3] line 0, event 15 ...
[c6xdsp ] 14: SYSTEM: IPC init DONE !!!
[m3video] 624: SYSTEM: IPC init DONE !!!
[m3vpss ] 624: SYSTEM: IPC init DONE !!!
[c6xdsp ] 15: MEM: Shared Region 2: Base = 0xae000000, Length = 0x109c0000 (265 MB)
[c6xdsp ] 16: MEM: DEBUG: SharedRegion_setEntry (2, 0x9ffa7b9c) OK !!! (status=0)
[c6xdsp ] 16: MEM: Shared Region 1: Base = 0x90000000, Length = 0x0c900000 (201 MB)
[c6xdsp ] 16: SYSTEM : System Common Init Done !!!
[c6xdsp ] 10: SYSTEM : System DSP Init in progress !!!
[c6xdsp ] 10: SYSTEM : RpeServer_init() done... Ret Val 0!!!
[c6xdsp ] 18: SYSTEM: Creating ListMP [DSP_IPC_OUT_19] in region 0 ...
[c6xdsp ] 18: SYSTEM: Creating ListMP [DSP_IPC_IN_19] in region 0 ...
[c6xdsp ] 19: SYSTEM: ListElem Shared Addr = 0xbf273e00
[c6xdsp ] 19: SYSTEM: Creating ListMP [DSP_IPC_OUT_20] in region 0 ...
[c6xdsp ] 19: SYSTEM: Creating ListMP [DSP_IPC_IN_20] in region 0 ...
[m3video] 630: MEM: Shared Region 2: Base = 0xae000000, Length = 0x109c0000 (265 MB)
[m3vpss ] 630: MEM: Shared Region 2: Base = 0xae000000, Length = 0x109c0000 (265 MB)
[c6xdsp ] 19: SYSTEM: ListElem Shared Addr = 0xbf299600
[m3video] 630: MEM: DEBUG: SharedRegion_setEntry (2, 0x3d881f80) OK !!! (status=0)
[m3vpss ] 630: MEM: DEBUG: SharedRegion_setEntry (2, 0x3ed6ae00) OK !!! (status=0)
[c6xdsp ] 20: SYSTEM: Creating ListMP [DSP_IPC_OUT_21] in region 0 ...
[m3video] 630: MEM: Shared Region 1: Base = 0x90000000, Length = 0x0c900000 (201 MB)
[m3vpss ] 630: MEM: Shared Region 1: Base = 0x90000000, Length = 0x0c900000 (201 MB)
[c6xdsp ] 20: SYSTEM: Creating ListMP [DSP_IPC_IN_21] in region 0 ...
[m3video] 632: SYSTEM : System Common Init Done !!!
[m3vpss ] 632: SYSTEM : System Common Init Done !!!
[c6xdsp ] 20: SYSTEM: ListElem Shared Addr = 0xbf2bee00
[m3video] 632: SYSTEM : System Video Init in progress !!!
[m3vpss ] 632: SYSTEM : System VPSS Init in progress !!!
[c6xdsp ] 20: SYSTEM: Creating ListMP [DSP_IPC_OUT_24] in region 0 ...
[m3video] 632: SYSTEM : System Video Init Done !!!
[c6xdsp ] 21: SYSTEM: Creating ListMP [DSP_IPC_IN_24] in region 0 ...
[m3video] 633: SYSTEM: Creating ListMP [VIDEO-M3_IPC_OUT_0] in region 0 ...
[m3vpss ] === HDVPSS Clocks are enabled ===
[c6xdsp ] 21: SYSTEM: ListElem Shared Addr = 0xbf2e4600
[m3video] 633: SYSTEM: Creating ListMP [VIDEO-M3_IPC_IN_0] in region 0 ...
[m3vpss ] === HDVPSS is fully functional ===
[c6xdsp ] 21: SYSTEM: Creating ListMP [DSP_IPC_OUT_25] in region 0 ...
[m3video] 633: SYSTEM: ListElem Shared Addr = 0xbf31fc00
[m3vpss ] === HDVPSS module is not in standby ===
[c6xdsp ] 21: SYSTEM: Creating ListMP [DSP_IPC_IN_25] in region 0 ...
[m3video] 635: SYSTEM: Creating ListMP [VIDEO-M3_IPC_OUT_1] in region 0 ...
[m3vpss ] === I2C1 Clk is active ===
[c6xdsp ] 21: SYSTEM: ListElem Shared Addr = 0xbf302100
[m3video] 635: SYSTEM: Creating ListMP [VIDEO-M3_IPC_IN_1] in region 0 ...
[m3vpss ] 641: SYSTEM: Creating ListMP [VPSS-M3_IPC_OUT_0] in region 0 ...
[c6xdsp ] !!WARNING.Resource already registered:2
[c6xdsp ] 16: SYSTEM : Initializing Links !!!
[m3video] 635: SYSTEM: ListElem Shared Addr = 0xbf323100
[m3vpss ] 641: SYSTEM: Creating ListMP [VPSS-M3_IPC_IN_0] in region 0 ...
[m3video] 641: SYSTEM: Creating ListMP [VIDEO-M3_IPC_OUT_19] in region 0 ...
[m3vpss ] 641: SYSTEM: ListElem Shared Addr = 0xbf326600
[c6xdsp ] 22: SYSTEM : FREE SPACE : System Heap = 10391168 B, Mbx = 10240 msgs)
[m3video] 642: SYSTEM: Creating ListMP [VIDEO-M3_IPC_IN_19] in region 0 ...
[m3vpss ] 643: SYSTEM: Creating ListMP [VPSS-M3_IPC_OUT_1] in region 0 ...
[m3video] 642: SYSTEM: ListElem Shared Addr = 0xbf329b00
[m3vpss ] 643: SYSTEM: Creating ListMP [VPSS-M3_IPC_IN_1] in region 0 ...
[c6xdsp ] 25: SYSTEM : Initializing Links ... DONE !!!
[m3video] 644: SYSTEM: Creating ListMP [VIDEO-M3_IPC_OUT_20] in region 0 ...
[m3vpss ] 644: SYSTEM: ListElem Shared Addr = 0xbf34f300
[m3video] 644: SYSTEM: Creating ListMP [VIDEO-M3_IPC_IN_20] in region 0 ...
[m3vpss ] 658: SYSTEM: Creating ListMP [VPSS-M3_IPC_OUT_19] in region 0 ...
[c6xdsp ] ETH_OFFLOAD: Init !!!
[m3video] 645: SYSTEM: ListElem Shared Addr = 0xbf352800
[m3vpss ] 658: SYSTEM: Creating ListMP [VPSS-M3_IPC_IN_19] in region 0 ...
[c6xdsp ] 26: SYSTEM : System DSP Init Done !!!
[m3video] 647: SYSTEM: Creating ListMP [VIDEO-M3_IPC_OUT_21] in region 0 ...
[m3vpss ] 658: SYSTEM: ListElem Shared Addr = 0xbf39d800
[m3video] 647: SYSTEM: Creating ListMP [VIDEO-M3_IPC_IN_21] in region 0 ...
[m3vpss ] 661: SYSTEM: Creating ListMP [VPSS-M3_IPC_OUT_20] in region 0 ...
[m3video] 647: SYSTEM: ListElem Shared Addr = 0xbf378000
[m3vpss ] 661: SYSTEM: Creating ListMP [VPSS-M3_IPC_IN_20] in region 0 ...
[m3video] 661: SYSTEM: Creating ListMP [VIDEO-M3_IPC_OUT_24] in region 0 ...
[m3vpss ] 661: SYSTEM: ListElem Shared Addr = 0xbf3c3280
[m3video] 661: SYSTEM: Creating ListMP [VIDEO-M3_IPC_IN_24] in region 0 ...
[m3vpss ] 664: SYSTEM: Creating ListMP [VPSS-M3_IPC_OUT_21] in region 0 ...
[m3video] 662: SYSTEM: ListElem Shared Addr = 0xbf3e8800
[m3vpss ] 664: SYSTEM: Creating ListMP [VPSS-M3_IPC_IN_21] in region 0 ...
[m3video] 664: SYSTEM: Creating ListMP [VIDEO-M3_IPC_OUT_25] in region 0 ...
[m3vpss ] 664: SYSTEM: ListElem Shared Addr = 0xbf423e00
[m3video] 664: SYSTEM: Creating ListMP [VIDEO-M3_IPC_IN_25] in region 0 ...
[m3vpss ] 666: SYSTEM : HDVPSS Drivers Version: HDVPSS_01_00_01_37
[m3video] 664: SYSTEM: ListElem Shared Addr = 0xbf406900
[m3vpss ] 666: SYSTEM : FVID2 Init in progress !!!
[m3video] 666: HDVICP: Doing PRCM for IVAHD[0] ...
[m3video] 666: HDVICP: PRCM for IVAHD[0] ... DONE.
[m3video] 666: HDVICP: Doing PRCM for IVAHD[1] ...
[m3video] 666: HDVICP: PRCM for IVAHD[1] ... DONE.
[m3video] 666: HDVICP: Doing PRCM for IVAHD[2] ...
[m3vpss ] TILER_STATS: CNT :8BIT
[m3video] 666: HDVICP: PRCM for IVAHD[2] ... DONE.
[m3video] 667: SYSTEM : Initializing Links !!!
[m3vpss ] TILER_STATS: CNT RESOLUTION: 16384 x 8192
[c6xdsp ] Remote Debug Shared Memory @ 0xbf000000
[m3video] Remote Debug Shared Memory @ 0xbf010820
[m3vpss ] Remote Debug Shared Memory @ 0xbf021040
[m3vpss ] Received character 's'
[m3video] 667: SYSTEM : FREE SPACE : System Heap = 6279304 B, Mbx = 10240 msgs)
[m3vpss ] TILER_STATS: BUCKET RESOLUTION: 16384 x 8188
[c6xdsp ] Remote Debug Shared Memory @ 0xbf000000
[m3video] Remote Debug Shared Memory @ 0xbf010820
[m3vpss ] Remote Debug Shared Memory @ 0xb[module] vpss probe done.
f021040
[m3video] Received character 's'
[m3video] 667: SYSTEM : FREE SPACE : SR0 Heap = 12283904 B (11 MB)
[m3vpss ] TILER_STATS: NUM FREE BUCKETS: 1
[c6xdsp ] Remote Debug Shared Memory @ 0xbf000000
[m3video] Remote Debug Shared Memory @ 0xbf010820
[m3vpss ] Remote Debug Shared Memory @ 0xbf021040
[c6xdsp ] Received character 's'
/opt/dvr_rdk/ti816x
[[module] ti81xxfb probe done.
m3video] 667: SYSTEM : FREE SPACE : Frame Buffer = 278658944 B (265 MB)
[m3vpss ] TILER_STATS: NUM USED BUCKETS: 0
[m3video] 667: SYSTEM : FREE SPACE : Bitstream Buffer = 210763648 B (200 MB)
[m3vpss ] TILER_STATS: TOTAL FREE AREA: 134152192 (99 %)
[m3video] 667: SYHDMI W1 rev 2.0
STEM: Opening MsHDMI CEC Spec version 1.2
gQ [VPSS-M3_MSGQ] ...
[m3vpss ] TILER_STATS: TOTAL USED AREA: 0 (0 %)
[m3video] 669: SYSTEM : FREE SPACE : Tiler 8-bit = 134152192 B (127 MB) - TILER ON
[m3video] 669: SYSTEM : FREE SPACE : Tiler 16-bit = 100663296 B (96 MB) - TILER ON
[m3video] 705: SYSTEM : Initializing Links ... DONE !!!
[m3vpss ] TILER_STATS: CNT :16BIT
[m3vpss ] TILER_STATS: CNT RESOLUTION: 32768 x 3072
[m3vpss ] TILER_STATS: BUCKET RESOLUTION: 32768 x 3072
[m3vpss ] TILER_STATS: NUM FREE BUCKETS: 1
[m3vpss ] TILER_STATS: NUM USED BUCKETS: 0
[m3vpss ] TILER_STATS: TOTAL FREE AREA: 100663296 (100 %)
[m3vpss ] TILER_STATS: TOTAL USED AREA: 0 (0 %)
[m3vpss ] 739: SYSTEM : FVID2 Init in progress DONE !!!
[m3vpss ] 739: SYSTEM : Device Init in progress !!!
[m3vpss ] 742: SYSTEM : Device Init in progress DONE !!!
[m3vpss ] 782: SYSTEM : System VPSS Init Done !!!
[m3vpss ] 783: UTILS: DMA: HWI Create for INT63 !!!
[m3vpss ] 783: SYSTEM : Initializing Links !!!
[m3vpss ] 783: SYSTEM : FREE SPACE : System Heap = 74056 B, Mbx = 10240 msgs)
[m3vpss ] 783: SYSTEM : FREE SPACE : SR0 Heap = 12283904 B (11 MB)
[m3vpss ] 784: SYSTEM : FREE SPACE : Frame Buffer = 274348928 B (261 MB)
[m3vpss ] 784: SYSTEM : FREE SPACE : Bitstream Buffer = 210763648 B (200 MB)
[m3vpss ] TILER_STATS: CNT :8BIT
[m3vpss ] TILER_STATS: CNT RESOLUTION: 16384 x 8192
[m3vpss ] TILER_STATS: BUCKET RESOLUTION: 16384 x 8188
[m3vpss ] TILER_STATS: NUM FREE BUCKETS: 1
[m3vpss ] TILER_STATS: NUM USED BUCKETS: 0
[m3vpss ] TILER_STATS: TOTAL FREE AREA: 134152192 (99 %)
[m3vpss ] TILER_STATS: TOTAL USED AREA: 0 (0 %)
[m3vpss ] TILER_STATS: CNT :16BIT
[m3vpss ] TILER_STATS: CNT RESOLUTION: 32768 x 3072
[m3vpss ] TILER_STATS: BUCKET RESOLUTION: 32768 x 3072
[m3vpss ] TILER_STATS: NUM FREE BUCKETS: 1
[m3vpss ] TILER_STATS: NUM USED BUCKETS: 0
[m3vpss ] TILER_STATS: TOTAL FREE AREA: 100663296 (100 %)
[m3vpss ] TILER_STATS: TOTAL USED AREA: 0 (0 %)
[m3vpss ] 785: SYSTEM : FREE SPACE : Tiler 8-bit = 134152192 B (127 MB) - TILER ON
[m3vpss ] 785: SYSTEM : FREE SPACE : Tiler 16-bit = 100663296 B (96 MB) - TILER ON
[m3vpss ] 904: SYSTEM : Initializing Links ... DONE !!!
[m3vpss ] 904: SYSTEM : Set Static L3 pressure for HDVPSS as High
ORG 0x46c00524: 0
NEW 0x46c00524: 2
root@dm816x:/opt/dvr_rdk/ti816x# ./run.sh
=========
Main Menu
=========
1: VCAP + VENC + VDEC + VDIS - Progressive SD Encode + Decode
2: VCAP + VENC + VDIS - SD Encode ONLY
3: VCAP + VENC + VDEC + VDIS - Progressive HD Encode + Decode
4: VDEC + VDIS - SD/HD Decode ONLY
a: 960H DVR usecase
e: Exit
Enter Choice: 2
--------------- CHANNEL DETAILS-------------
Capture Channels => 4
Enc Channels => Primary 4, Secondary 0
Disp Channels => 0
-------------------------------------------
0: SYSTEM: System Common Init in progress !!!
0: SYSTEM: IPC init in progress !!!
13: SYSTEM: CPU [DSP] syslink proc ID is [0] !!!
13: SYSTEM: CPU [VIDEO-M3] syslink proc ID is [1] !!!
13: SYSTEM: CPU [VPSS-M3] syslink proc ID is [2] !!!
13: SYSTEM: CPU [HOST] syslink proc ID is [3] !!!
13: SYSTEM: Creating MsgQ Heap [IPC_MSGQ_MSG_HEAP_3] ...
15: SYSTEM: Creating MsgQ [HOST_MSGQ] ...
17: SYSTEM: Creating MsgQ [HOST_ACK_MSGQ] ...
19: SYSTEM: Opening MsgQ [DSP_MSGQ] ...
19: SYSTEM: Opening MsgQ [VIDEO-M3_MSGQ] ...
20: SYSTEM: Opening MsgQ [VPSS-M3_MSGQ] ...
21: SYSTEM: Notify register to [DSP] line 0, event 15 ...
21: SYSTEM: Notify register to [VIDEO-M3] line 0, event 15 ...
22: SYSTEM: Notify register to [VPSS-M3] line 0, event 15 ...
23: SYSTEM: IPC init DONE !!!
24: SYSTEM: Creating ListMP [HOST_IPC_OUT_24] in region 0 ...
26: SYSTEM: Creating ListMP [HOST_IPC_IN_24] in region 0 ...
27: SYSTEM: ListElem Shared Addr = 0x406e3880
28: SYSTEM: Creating ListMP [HOST_IPC_OUT_25] in region 0 ...
30: SYSTEM: Creating ListMP [HOST_IPC_IN_25] in region 0 ...
32: SYSTEM: ListElem Shared Addr = 0x40718a80
33: SYSTEM: Creating ListMP [HOST_IPC_OUT_19] in region 0 ...
35: SYSTEM: Creating ListMP [HOST_IPC_IN_19] in region 0 ...
37: SYSTEM: ListElem Shared Addr = 0x4074dc80
38: SYSTEM: Creating ListMP [HOST_IPC_OUT_20] in region 0 ...
40: SYSTEM: Creating ListMP [HOST_IPC_IN_20] in region 0 ...
41: SYSTEM: ListElem Shared Addr = 0x40790f80
42: SYSTEM: Creating ListMP [HOST_IPC_OUT_21] in region 0 ...
45: SYSTEM: Creating ListMP [HOST_IPC_IN_21] in region 0 ...
46: SYSTEM: ListElem Shared Addr = 0x407d4280
63: SYSTEM: System Common Init Done !!!
[host] HDMI Ctrl :Initializing
[host] HDMI Ctrl :Initialized
[host] HDMI Ctrl :Sink Connected
Enable file write (YES - y / NO - n) : n
File write DISABLED !!!
[host] MCFW_IPCFRAMES:VcapVenc_ipcFramesSendRecvFxn:Entered... 1951: MCFW : CPU Revision [ES2.0] !!!
TVP_CHIP_ID_READ:0x5158
VCAP: DEVICE-0 (0x58): Chip ID 0x5158, Rev 0x0002, Firmware 0x0000 !!!
VCAP: DEVICE-0 (0x58): Detected video (720x288@50Hz, 1) !!!
VCAP: DEVICE-1 (0x5c): Device not found !!!
VCAP: DEVICE-2 (0x5a): Chip ID 0x5158, Rev 0x0002, Firmware 0x0000 !!!
VCAP: DEVICE-2 (0x5a): NO Video Detected !!!
VCAP: DEVICE-3 (0x5e): Chip ID 0x5158, Rev 0x0002, Firmware 0x0000 !!!
VCAP: DEVICE-3 (0x5e): NO Video Detected !!!
TVP5158: 0x58: Downloading patch ...
TVP5158: 0x58: Downloading patch ... DONE !!!
TVP5158: 0x58: 5158:0002:0302
TVP5158: 0x5a: Downloading patch ...
TVP5158: 0x5a: Downloading patch ... DONE !!!
TVP5158: 0x5a: 5158:0002:0302
TVP5158: 0x5e: Downloading patch ...
TVP5158: 0x5e: Downloading patch ... DONE !!!
TVP5158: 0x5e: 5158:0002:0302
gVencModuleContext.vencConfig.numPrimaryChn = 4
[m3vpss ] 150962: CAPTURE: Create in progress !!!
[m3vpss ] 150992: CAPTURE: VIP0 PortA capture mode is [ 8-bit, Pixel-mux Embedded Sync] !!!
[m3vpss ] UTILS: DMA: Allocated CH (TCC) = 58 (58)
[m3vpss ] UTILS: DMA: 0 of 4: Allocated PaRAM = 58 (0x49004740)
[m3vpss ] UTILS: DMA: 1 of 4: Allocated PaRAM = 64 (0x49004800)
[m3vpss ] UTILS: DMA: 2 of 4: Allocated PaRAM = 65 (0x49004820)
[m3vpss ] UTILS: DMA: 3 of 4: Allocated PaRAM = 66 (0x49004840)
[m3vpss ] CAPTURE::HEAPID:0 USED:328
[m3vpss ] CAPTURE::HEAPID:4 USED:22800384
[m3vpss ] 151081: CAPTURE: Create Done !!!
[m3vpss ] 151081: DEI : Create in progress !!!
[c6xdsp ] 150585: IPC_FRAMES_OUT : Create in progress !!!
[m3video] 151195: IPC_IN_M3 : Create in progress !!!
[m3vpss ] 151190: DEI : Loading Up-scaling Co-effs
[c6xdsp ] 150586: SYSTEM: Opening MsgQ [VPSS-M3_MSGQ] ...
[m3video] 151195: SYSTEM: Opening ListMP [VPSS-M3_IPC_OUT_0] ...
[m3vpss ] 151190: DEI : Co-effs Loading ... DONE !!!
[m3video] 151196: SYSTEM: Opening ListMP [VPSS-M3_IPC_IN_0] ...
[c6xdsp ] 150587: IPC_FRAMES_OUT : Create Done !!!
[m3video] 151198: IPC_IN_M3 : Create Done !!!
[m3vpss ] DEI:HEAPID:0 USED:64
[m3video] 151198: ENCODE: Create in progress ... !!!
[m3vpss ] DEI:HEAPID:1 USED:10304
[m3video] 4: ENCODE:pObj->inQueInfo.numCh= 0
[m3vpss ] DEI:HEAPID:4 USED:22708224
[m3vpss ] 151190: DEI : Create Done !!!
[m3vpss ] 151193: IPC_OUT_M3 : Create in progress !!!
[m3vpss ] 151193: SYSTEM: Opening MsgQ [DSP_MSGQ] ...
[m3vpss ] 151195: IPC_OUT_M3 : Create Done !!!
[m3video] 151224: ENCODE: Creating CH0 of 704 x 576, pitch = (704, 704) [PROGRESSIVE] [NON-TILED ], bitrate = 2000 Kbps ...
[m3video] ENCLINK_H264:HEAPID:0 USED:13808
[m3video] ENCLINK_H264:HEAPID:3 USED:1769472
[m3video] 151234: ENCODE: Creating CH1 of 704 x 576, pitch = (704, 704) [PROGRESSIVE] [NON-TILED ], bitrate = 2000 Kbps ...
[host] IpcBitsInLink_tskMain:Entered
[host] 13615: IPC_BITS_IN : Create in progress !!!
[host] 13615: IPC_BITS_IN : ListMPOpen start !!!
[host] 13615: SYSTEM: Opening ListMP [VIDEO-M3_IPC_OUT_24] ...
13617: SYSTEM: Opening ListMP [VIDEO-M3_IPC_IN_24] ...
[host] 13619: IPC_BITS_IN : ListMPOpen done !!!
[host] 13620: IPC_BITS_IN : System_linkGetInfo done !!!
[host] 13620: IPC_BITS_IN : Create Done !!!
Vsys_create()out;
Venc_start()in;
Venc_start()out;
Vcap_start()in;
[m3video] ENCLINK_H264:HEAPID:0 USED:11912
[m3video] ENCLINK_H264:HEAPID:3 USED:1769472
[m3video] 151243: ENCODE: Creating CH2 of 704 x 576, pitch = (704, 704) [PROGRESSIVE] [NON-TILED ], bitrate = 2000 Kbps ...
[m3video] ENCLINK_H264:HEAPID:0 USED:11912
[m3vpss ] 151292: CAPTURE: Start in progress !!!
[m3video] ENCLINK_H264:HEAPID:3 USED:1769472
[m3video] 151253: ENCODE: Creating CH3 of 704 x 576, pitch = (704, 704) [PROGRESSIVE] [NON-TILED ], bitrate = 2000 Kbps ...
[m3video] ENCLINK_H264:HEAPID:0 USED:11912
[m3video] ENCLINK_H264:HEAPID:3 USED:1769472
[m3video] 151262: ENCODE: All CH Create ... DONE !!!
[m3video] ENCLINK:HEAPID:0 USED:49664
[m3video] ENCLINK:HEAPID:2 USED:4976640
[m3video] ENCLINK:HEAPID:3 USED:7077888
[m3video] 151264: ENCODE: Create ... DONE !!!
[m3video] 151264: IPC_BITS_OUT : Create in progress !!!
[m3video] 151266: IPC_BITS_OUT : Create Done !!!
[m3vpss ] 151392: CAPTURE: Enabled Time Stamping !!!
Vcap_start()out;
[m3vpss ] 151400: CAPTURE: Start Done !!!
[m3vpss ] MSGQ:Warning!! Forcing waitAck = TRUE as waitAck = FALSE is not supported.
[m3vpss ] Fix send cmd [0x4] to linkId [0x13]
[m3vpss ] MSGQ:Warning!! Forcing waitAck = TRUE as waitAck = FALSE is not supported.
[m3vpss ] Fix send cmd [0x4] to linkId [0x13]
[m3vpss ] MSGQ:Warning!! Forcing waitAck = TRUE as waitAck = FALSE is not supported.
[m3vpss ] Fix send cmd [0x4] to linkId [0x13]
DEMO: 0: video detected at CH [0,0] width:720 height:288 !!!
DEMO: 1: No video detected at CH [0,1] !!!
DEMO: 2: No video detected at CH [0,2] !!!
DEMO: 3: No video detected at CH [0,3] !!!
DEMO: 4: No video detected at CH [1,0] !!!
DEMO: 5: No video detected at CH [1,1] !!!
DEMO: 6: No video detected at CH [1,2] !!!
DEMO: 7: No video detected at CH [1,3] !!!
DEMO: 8: No video detected at CH [2,0] !!!
DEMO: 9: No video detected at CH [2,1] !!!
DEMO: 10: No video detected at CH [2,2] !!!
DEMO: 11: No video detected at CH [2,3] !!!
DEMO: 12: No video detected at CH [3,0] !!!
DEMO: 13: No video detected at CH [3,1] !!!
DEMO: 14: No video detected at CH [3,2] !!!
DEMO: 15: No video detected at CH [3,3] !!!
=============
Run-Time Menu
=============
1: Capture Settings
2: Encode Settings
3: Decode Settings
4: Display Settings
5: Audio Capture <TVP5158> & Encode <AAC-LC, G711> demo
6: Change Playback Channel <valid only if capture/playback is active>
7: Audio encode demo <File In/Out>
8: Audio decode demo <File In/Out>
i: Print detailed system information
s: Core Status: Active/In-active
f: Switch IVA Channel Map
e: Stop Demo
Enter Choice: [m3vpss ] MSGQ:Warning!! Forcing waitAck = TRUE as waitAck = FALSE is not supported.
[m3vpss ] Fix send cmd [0x4] to linkId [0x13]
[m3vpss ] MSGQ:Warning!! Forcing waitAck = TRUE as waitAck = FALSE is not supported.
[m3vpss ] Fix send cmd [0x4] to linkId [0x13]
[m3vpss ] MSGQ:Warning!! Forcing waitAck = TRUE as waitAck = FALSE is not supported.
[m3vpss ] Fix send cmd [0x4] to linkId [0x13]
[m3vpss ] MSGQ:Warning!! Forcing waitAck = TRUE as waitAck = FALSE is not supported.
[m3vpss ] Fix send cmd [0x4] to linkId [0x13]
[m3vpss ] MSGQ:Warning!! Forcing waitAck = TRUE as waitAck = FALSE is not supported.
[m3vpss ] Fix send cmd [0x4] to linkId [0x13]
[m3vpss ] MSGQ:Warning!! Forcing waitAck = TRUE as waitAck = FALSE is not supported.
[m3vpss ] Fix send cmd [0x4] to linkId [0x13]
[m3vpss ] MSGQ:Warning!! Forcing waitAck = TRUE as waitAck = FALSE is not supported.
[m3vpss ] Fix send cmd [0x4] to linkId [0x13]
DEMO: HDMI TV/Monitor connected !!!
=============
Run-Time Menu
=============
1: Capture Settings
2: Encode Settings
3: Decode Settings
4: Display Settings
5: Audio Capture <TVP5158> & Encode <AAC-LC, G711> demo
6: Change Playback Channel <valid only if capture/playback is active>
7: Audio encode demo <File In/Out>
8: Audio decode demo <File In/Out>
i: Print detailed system information
s: Core Status: Active/In-active
f: Switch IVA Channel Map
e: Stop Demo
Enter Choice: i
DEMO: 0: Detected video at CH [0,0] (720x288@50Hz, 1)!!!
DEMO: 1: No video detected at CH [0,1] !!!
DEMO: 2: No video detected at CH [0,2] !!!
DEMO: 3: No video detected at CH [0,3] !!!
DEMO: 4: No video detected at CH [1,0] !!!
DEMO: 5: No video detected at CH [1,1] !!!
DEMO: 6: No video detected at CH [1,2] !!!
DEMO: 7: No video detected at CH [1,3] !!!
DEMO: 8: No video detected at CH [2,0] !!!
DEMO: 9: No video detected at CH [2,1] !!!
DEMO: 10: No video detected at CH [2,2] !!!
DEMO: 11: No video detected at CH [2,3] !!!
DEMO: 12: No video detected at CH [3,0] !!!
DEMO: 13: No video detected at CH [3,1] !!!
DEMO: 14: No video detected at CH [3,2] !!!
DEMO: 15: No video detected at CH [3,3] !!!
[c6xdsp ]
[c6xdsp ] *** IpcFramesOutRTOS Statistics ***
[c6xdsp ]
[c6xdsp ] Elasped Time : 89 secs
[c6xdsp ] Total Fields Processed : 0
[c6xdsp ] Total Fields FPS : 0 FPS
[c6xdsp ]
[c6xdsp ]
[c6xdsp ] CH | In Recv In Process In Skip
[c6xdsp ] Num | FPS FPS FPS
[c6xdsp ] --------------------------------
[m3vpss ]
[c6xdsp ] 0 | 0 0 0
[c6xdsp ] 1 | 0 0 0
[m3vpss ] *** Capture Driver Advanced Statistics ***
[c6xdsp ] 2 | 0 0 0
[c6xdsp ] 3 | 0 0 0
[m3vpss ]
[c6xdsp ]
[m3vpss ] VIP Parser Reset Count : 0
[m3vpss ]
[m3vpss ] | Total Even Odd Total Even Odd Min / Max Min / Max Dropped Fid Repeat Frame Error Y/C
[m3vpss ] CH | Fields Fields Fields FPS FPS FPS Width Height Fields Count (Desc Error Y/C)
[m3vpss ] ------------------------------------------------------------------------------------------------------------
[m3vpss ] 000 | 4479 2240 2239 50 25 25 720 / 720 288 / 288 1 0 0/0 (0/0)
[m3vpss ] 001 | 5348 2674 2674 60 30 30 720 / 720 243 / 244 1 0 0/0 (0/0)
[m3vpss ] 002 | 5348 2674 2674 60 30 30 720 / 720 243 / 244 1 0 0/0 (0/0)
[m3vpss ] 003 | 5348 2674 2674 60 30 30 720 / 720 243 / 244 1 0 0/0 (0/0)
[m3vpss ]
[m3vpss ] VIP Capture Port 0 | DescMissMatch1 = 0, DescMissMatch2 = 0 , DescMissMatch3 = 0
[m3vpss ]
[m3vpss ] *** Capture List Manager Advanced Statistics ***
[m3vpss ]
[m3vpss ] List Post Count : 11200
[m3vpss ] List Stall Count : 0
[m3vpss ] List Post Time (ms) : Max = 0, Min = 0, Avg = 0, Total = 0
[m3vpss ] INTC Timeout Count : (0, 0) (Min timeout value = 985, 1000)
[m3vpss ] Descriptor miss found count : 0
[m3vpss ]
[m3vpss ]
[m3vpss ] VIP and VPDMA registers,
[m3vpss ] VIP0 : FIQ_STATUS : 0x4810551c = 0x00000000
[m3vpss ] VIP1 : FIQ_STATUS : 0x48105a1c = 0x00000000
[m3vpss ] VPDMA: LIST_BUSY : 0x4810d00c = 0x00000000
[m3vpss ]
[m3vpss ]
[m3vpss ] 240995: CAPTURE: Fields = 20518 (fps = 229, CPU Load = 0)
[m3vpss ] 240995: CAPTURE: Num Resets = 0 (Avg 0 ms per reset)
[m3vpss ] 240995: SYSTEM : FREE SPACE : System Heap = 68048 B, Mbx = 10239 msgs)
[m3vpss ] 240995: SYSTEM : FREE SPACE : SR0 Heap = 8713728 B (8 MB)
[m3vpss ] 240995: SYSTEM : FREE SPACE : Frame Buffer = 221762432 B (211 MB)
[m3vpss ] 240996: SYSTEM : FREE SPACE : Bitstream Buffer = 205787008 B (196 MB)
[m3vpss ] 240996: SYSTEM : FREE SPACE : Tiler Buffer = 224 B (0 MB) - TILER OFF
[m3vpss ]
[m3vpss ] *** [DEI0 ] DEI Statistics ***
[m3vpss ]
[m3vpss ] Elasped Time : 89 secs
[m3vpss ] Total Fields Processed : 20514
[m3vpss ] Total Fields FPS : 653 FPS
[m3vpss ]
[m3vpss ]
[m3vpss ] CH | In Recv In Reject In Process Out[0] Out[1] Out[2] Out[3] Out[4] Skip Out[0] Skip Out[1] Skip Out[2] Skip Out[3] Skip Out[4] User Out[0] User Out[1] User Out[2] User Out[3] User Out[4] Latency
[m3vpss ] Num | FPS FPS FPS FPS FPS FPS FPS FPS FPS FPS FPS FPS FPS Skip FPS Skip FPS Skip FPS Skip FPS Skip FPS Min / Max
[m3vpss ] -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
[m3vpss ] 0 | 50 0 50 0 0 0 0 0 50 50 0 0 0 0 0 0 0 0 14 / 31
[m3vpss ] 1 | 60 0 60 0 0 0 0 0 60 59 0 0 0 0 0 0 0 0 16 / 29
[m3vpss ] 2 | 60 0 60 0 0 0 0 0 60 59 0 0 0 0 0 0 0 0 16 / 29
[m3vpss ] 3 | 60 0 60 0 0 0 0 0 60 59 0 0 0 0 0 0 0 0 16 / 29
[m3vpss ]
[m3video] 246999: HDVICP-ID:0
[m3video] All percentage figures are based off totalElapsedTime
[m3video] totalAcquire2wait :0 %
[m3video] totalWait2Isr :0 %
[m3video] totalIsr2Done :0 %
[m3video] totalWait2Done :0 %
[m3video] totalDone2Release :0 %
[m3video] totalAcquire2Release :0 %
[m3video] totalAcq2acqDelay :0 %
[m3video] totalElapsedTime in msec : 0
[m3video] numAccessCnt: 0
[m3video] IVA-FPS : 0
[m3video] Average time spent per frame in microsec: 0
[m3video] 247000: HDVICP-ID:1
[m3video] All percentage figures are based off totalElapsedTime
[m3video] totalAcquire2wait :0 %
[m3video] totalWait2Isr :0 %
[m3video] totalIsr2Done :0 %
[m3video] totalWait2Done :0 %
[m3video] totalDone2Release :0 %
[m3video] totalAcquire2Release :0 %
[m3video] totalAcq2acqDelay :0 %
[m3video] totalElapsedTime in msec : 0
[m3video] numAccessCnt: 0
[m3video] IVA-FPS : 0
[m3video] Average time spent per frame in microsec: 0
[m3video] 247000: HDVICP-ID:2
[m3video] All percentage figures are based off totalElapsedTime
[m3video] totalAcquire2wait :0 %
[m3video] totalWait2Isr :0 %
[m3video] totalIsr2Done :0 %
[m3video] totalWait2Done :0 %
[m3video] totalDone2Release :0 %
[m3video] totalAcquire2Release :0 %
[m3video] totalAcq2acqDelay :0 %
[m3video] totalElapsedTime in msec : 0
[m3video] numAccessCnt: 0
[m3video] IVA-FPS : 0
[m3video] Average time spent per frame in microsec: 0
[m3video]
[m3video] *** ENCODE Statistics ***
[m3video]
[m3video] Elasped Time : 247 secs
[m3video]
[m3video]
[m3video] CH | In Recv In Skip In User Out Latency
[m3video] Num | FPS FPS Skip FPS FPS Min / Max
[m3video] --------------------------------------------
[m3video] 0 | 0 0 0 0 0 / 0
[m3video] 1 | 0 0 0 0 0 / 0
[m3video] 2 | 0 0 0 0 0 / 0
[m3video] 3 | 0 0 0 0 0 / 0
[m3video]
[m3video] Multi Channel Encode Average Submit Batch Size
[m3video] Max Submit Batch Size : 24
[m3video] IVAHD_0 Average Batch Size : 0
[m3video] IVAHD_0 Max achieved Batch Size : 0
[m3video] IVAHD_1 Average Batch Size : 0
[m3video] IVAHD_1 Max achieved Batch Size : 0
[m3video] IVAHD_2 Average Batch Size : 0
[m3video] IVAHD_2 Max achieved Batch Size : 0
[m3video]
[m3video] Multi Channel Encode Batch break Stats
[m3video] Total Number of Batches created: 0
[m3video] All numbers are based off total number of Batches created
[m3video] Batch breaks due to batch sizeexceeding limit: 0 %
[m3video] Batch breaks due to ReqObj Que being empty: 0 %
[m3video] Batch breaks due to changed resolution class: 0 %
[m3video] Batch breaks due to interlace and progressivecontent mix: 0 %
[m3video] Batch breaks due to channel repeat: 0 %
[m3video] Batch breaks due to different codec: 0 %
[m3video] Total Number of Batches created: 0
[m3video] All numbers are based off total number of Batches created
[m3video] Batch breaks due to batch sizeexceeding limit: 0 %
[m3video] Batch breaks due to ReqObj Que being empty: 0 %
[m3video] Batch breaks due to changed resolution class: 0 %
[m3video] Batch breaks due to interlace and progressivecontent mix: 0 %
[m3video] Batch breaks due to channel repeat: 0 %
[m3video] Batch breaks due to different codec: 0 %
[m3video] Total Number of Batches created: 0
[m3video] All numbers are based off total number of Batches created
[m3video] Batch breaks due to batch sizeexceeding limit: 0 %
[m3video] Batch breaks due to ReqObj Que being empty: 0 %
[m3video] Batch breaks due to changed resolution class: 0 %
[m3video] Batch breaks due to interlace and progressivecontent mix: 0 %
[m3video] Batch breaks due to channel repeat: 0 %
[m3video] Batch breaks due to different codec: 0 %
[m3vpss ]
[m3vpss ] 250004: LOAD: CPU: 4.9% HWI: 0.8%, SWI:0.7%
[m3vpss ]
[m3vpss ] 250005: LOAD: TSK: CAPTURE : 0.4%
[m3vpss ] 250005: LOAD: TSK: DEI0 : 1.8%
[m3vpss ] 250005: LOAD: TSK: MISC : 1.2%
[m3vpss ]
[m3video]
[m3video] 250505: LOAD: CPU: 1.5% HWI: 0.3%, SWI:0.4%
[m3video]
[m3video] 250505: LOAD: TSK: IPC_IN_M30 : 0.1%
[m3video] 250506: LOAD: TSK: ENC0 : 0.4%
[m3video] 250506: LOAD: TSK: MISC : 0.3%
[m3video]
[c6xdsp ]
[c6xdsp ] 250400: LOAD: CPU: 0.2% HWI: 0.0%, SWI:0.0%
[c6xdsp ]
[c6xdsp ] 250400: LOAD: TSK: MISC : 0.2%
[c6xdsp ]
*** Encode Bitstream Received Statistics ***
Elased time = 100.0 secs
CH | Bitrate (Kbps) | FPS | Key-frame FPS | Width (max/min) | Height (max/min) | Latency (max/min)
--------------------------------------------------------------------------------------------------
[host]
*** SCD Frame Results Received Statistics ***
Elased time = 113.9 secs
CH | Bitrate (Kbps) | FPS | Width (max/min) | Height (max/min)
----------------------------------------------------------------------------------
=============
Run-Time Menu
=============
1: Capture Settings
2: Encode Settings
3: Decode Settings
4: Display Settings
5: Audio Capture <TVP5158> & Encode <AAC-LC, G711> demo
6: Change Playback Channel <valid only if capture/playback is active>
7: Audio encode demo <File In/Out>
8: Audio decode demo <File In/Out>
i: Print detailed system information
s: Core Status: Active/In-active
f: Switch IVA Channel Map
e: Stop Demo
