request syslink source code on dm8168 platfrom.

Dillon

hi Adeneo:

i'm sorry to trouble you . now , i want add capture function in wince7 on dm8168 platform. as you know , our bsp's M3 firmware is 0100 0126 (it's too old). and don't support capture . so , can you give me the syslink driver code you had ported. or , need sign any NDA with TI , then you can give me ?

thanks .

over 12 years ago

0 Arnie Reynoso over 12 years ago

TI__Expert 6860 points

The SysLink releases don't support WinCE and I'm not aware of any ports of SysLink for WinCE. Others here may be able to correct me.

If there is a port, SysLink is typically shipped with most TI Software Development Kits (SDK). If you aren't using an SDK or one isn't available for your setup. You can always download SysLink from:

http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/syslink/index.html

0 Dillon over 12 years ago in reply to Arnie Reynoso

Prodigy 140 points

hi Arnie:

thanks for your reply. now ,syslink is running on wince7 system , ported by ti's third party adeneo who maintain wince .but ,the syslink they ported just work with M3 0100 0126 version , this version don't support capture , so , i want to update M3 firmware to 0100 0137.

before update firmware , i must update syslink first .

anyway , thanks for your kindly reply.

Processors

Processors forum

request syslink source code on dm8168 platfrom.