• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 99 subscribers
  • Views 315 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

C6727 Programming through MultiTAP ZN74 LVT 8980/8986 chain

Oleg Slavyansky
Prodigy 10 points
Other Parts Discussed in Thread: TMS320C6727B, SN74LVT8986, SN74LVT8980

I need to program TMS320C6727B/ TMS3206203B with USB JTAG through the chain of TI ZN74 LVT8980 / ZN74LVT8986 units. On last device I need to change configuration with linking shadow protocol. How to do this????? What initial file (svf or hex) I must write for USB??????

 

  • 0
    TI__Guru* 84110 points

    Oleg,

    Programming the DSPs through the JTAG chain using a compatible JTAG emulator is easy to do using Code Composer Studio as long as you have a stable and configured JTAG chain for the emulator to use.

    If you are asking how to configure that JTAG chain using the SN74LVT8980 / SN74LVT8986, that is not something we would know about on this C67x Single Core DSP Forum.

    If you will clarify what you are looking for, we can ask moderator to move this to the appropriate forum, such as the Logic Forum for those LVT devices.

    You may want to edit your post and title to correct the part numbers, unless I misunderstood that you had some typos.

    Regards,
    RandyP