• State
  • Locked Locked
  • Replies 0 replies
  • Subscribers 97 subscribers
  • Views 172 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Debugging DSP side in RPE

Mohammad Kiaei
Intellectual 675 points

Greetings,

I have wrapped my codec into the RPE package of EZSDK. Now, I am looking for a way to debug my code on the DSP side. The following wiki page explains an approach to view the traces of DSP on the ARM side in OMX package:

http://processors.wiki.ti.com/index.php/OMX_Viewing_Media_Controller_Traces#Viewing_traces_from_DSP_on_A8

However, the required modifications to DspAppMain.cfg cannot be applied to the correspondig file in RPE package, as it lacks the dependecies. Please let me know how I can see DSP's dumped messages on the serial terminal of ARM.

Thanks,
Mohammad