If we want to capture 720p30 video,does we need to change something?

SuitJune Young

Hello,every one.

We use dvrrdk 3.0 to develop our videobox.And now we want to capture 720P30 video from vip 8bit port.But if we select 720P30 video capture,it didn't work.

And there are some codes need to be changed for 720P30 capture?

Or if we want to change VIP port's video type(720p30,720p60,1080p30,1080p60),what we need to change for vip port?

Thank you!

over 12 years ago

0 Brijesh Jadav over 12 years ago

TI__Guru**** 477195 points

Hi Young,

Are you setting it to 8bit embedde sync format? Can you please check this? Also please note that you will have to send the sync codes in BT656 format not in BT1120 format,

Regards,

Brijesh

0 SuitJune Young over 12 years ago in reply to Brijesh Jadav

Genius 3985 points

I have to ask a naive problem.

In which file,can I set it to 8bit embedded sync format?

0 Brijesh Jadav over 12 years ago in reply to SuitJune Young

TI__Guru**** 477195 points

Its in capturelink. you will require to change create time parametes of the capture driver, to configure in 8bit emb. sync format.

Regards,

Brijesh

Processors

Processors forum

If we want to capture 720p30 video,does we need to change something?