ONvif and psia compliance

Rohit Gupta1

Hi,

Im working on DM365 based ipnc camera with appro framework using ipnc 3.0 version. I know TI has provided the support to the processor for onvif and psia compliance. But i want to test the same on my camera. Please guide me through the available options and the procedures so that i can test them well in time.

Any help in this regard would be deeply appreciated . Thanx in advance.

over 12 years ago

0 Raghu Kudva over 12 years ago

TI__Genius 11000 points

Rohit,

Guess, this is already answered on other mailchain

The reelase also has details in documents about the design and flow of ONVIF and PSIA implementation, please refer to this

Regards,

Raghu

0 Rohit Gupta1 over 12 years ago in reply to Raghu Kudva

Prodigy 110 points

Hi Raghu,

Thanx for the reply. Please, just forward the link to the mailchain which includes the content.

Also is it possible to check the onvif /psia compliance of my product through some free software available. Onvif Device manager v2.2.2.50 doesn't function well with the camera, it only detects it and further no functionality is possible.

Thanx in advance

0 Raghu Kudva over 12 years ago in reply to Rohit Gupta1

TI__Genius 11000 points

I was refering to this mailchain http://e2e.ti.com/support/dsp/davinci_digital_media_processors/f/100/p/278680/973740.aspx#973740

I am not aware fo any free software that does this, you cna use ONVIF / PSIA compliance tool from thier website but for that you need to be a member

Regards,

Raghu

Processors

Processors forum

ONvif and psia compliance