OMAP-L137 / DA830 Arago Build Environment

BRIGITTE SCHUSTER1

Other Parts Discussed in Thread: OMAP-L137

What is the recommended build environment to produce a sysroot and a rootfs for OMAP-L137 / DA830 platform?

Is Yocto the way to go?

Thanks,

Brigitte

0 Raja over 12 years ago

Hi Brigitte,

Thanks for the post.

Brigitte: said:

Is Yocto the way to go?

The current version of the Arago Project is based on OpenEmbedded-Core and the Yocto Project.

There are some legacy products still being shipped that use Classic Arago.

Please refer the section Note from below wiki link.

Brigitte: said:

What is the recommended build environment to produce a sysroot and a rootfs for OMAP-L137 / DA830 platform?

The OMAP-L137 build uses the classic arago project. Please follow the below wiki link to produce(build) a sysroot & rootfs for OMAP-L1:

0 BRIGITTE SCHUSTER1 over 12 years ago in reply to Raja

Thanks a lot for this very usefull information.

I went on and build a console image for OMAP-L137-EVM using the classic arago project.

Now I would like to customize this environment. I noticed that the latest version of linux is issued from PSP 03.20.00.14.

Would you have an update to use the newer linux from PSP 03.22.00.02?

0 Raja over 12 years ago in reply to BRIGITTE SCHUSTER1

Hi Brigitte,

Thanks for the post.

You shall update the existing bitbake recipe files to build with latest source files.

Please refer below thread for building with latest PSP releases.

Processors forum