xloader source codes for BeagleBone Black

Mooi Mooi Tan

Other Parts Discussed in Thread: AM3359

Hi,

I'm not sure if this is the right place to ask but I'm looking for xloader source codes for BeagleBone Black (Sitara AM3359). In http://circuitco.com/support/index.php?title=BeagleBoneBlack#Angstrom, u-boot, kernel and rootfs source codes for Angstrom distribution are provided. Where can I get the xloader source codes? Appreciate all comments.

Thanks in advance, MM

over 12 years ago

0 Steve Kipisz over 12 years ago

TI__Genius 15510 points

The x-loader (MLO file) now gets built when you build u-boot.

Steve K.

0 Mooi Mooi Tan over 12 years ago in reply to Steve Kipisz

Intellectual 390 points

Steve K,

Are you referring to the u-boot build using BitBake? I need to change xloader source codes for our customized AM335x design. With the package downloaded using BitBake, I'm able to get the MLO and u-boot.img images but I was not able to find the source codes that were being built.

If I'm to build the u-boot source codes manually, is this the right source to go for: http://www.denx.de/wiki/U-Boot/SourceCode (git://git.denx.de/u-boot.git)? Which command should I use for bootloader image build?

Thanks..

0 Hiep Pham over 12 years ago in reply to Mooi Mooi Tan

Prodigy 30 points

Hi Mooi,

Did you try linaro-uboot : https://launchpad.net/u-boot-linaro/trunk/13.01/+download/u-boot-linaro-2013.01.1.tar.gz ?

I see that it has the config: am335x_evm_config

Please use the patch from below link before compiling u-boot:

http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/145116

I used its MLO for my BBB board. Hope this could help :)

Hiep.

Processors

Processors forum

xloader source codes for BeagleBone Black