DM3730:AER

suhas_m

Other Parts Discussed in Thread: DM3730

how to run prebuilt aer binaries on mistral dm3730 evm. im not able to understand the procedure given in aer-installation-verification guide.i feel that instructions given in the guide is simulating aer on ccs,but i want to run them actually on the target(mistal evm)

over 12 years ago

0 Cvetolin Shulev-XID over 12 years ago

TI__Guru 65405 points

Hi Suhas,

Could you post a link to the guide which you are follow? This will be helpful for further investigation of the issue.

Tsvetolin Shulev

0 suhas_m over 12 years ago in reply to Cvetolin Shulev-XID

Expert 1400 points

thnx for ur interest,below is a link to the guide.........

http://software-dl.ti.com/libs/aer/latest/exports/AER_Installation_Verification.pdf

0 Cvetolin Shulev-XID over 12 years ago in reply to suhas_m

TI__Guru 65405 points

Hi Suhas,

The descriptions in this guide about pre-built images is very short. I recommend you to ask for more details and clarifications in the Code Composer studio forum:

http://e2e.ti.com/support/development_tools/code_composer_studio/default.aspx

Tsvetolin Shulev

Processors

Processors forum

DM3730:AER