How to change gstreamer clock to VIDEO0_PLL_OUT clock

ashwath hebbar

Hi,

I wanted to know is there any possible of changing gstreamer clock from default clock to say VIDEO0_PLL_OUT clock for streaming. After the above changes the pipeline should be able to use VIDEO0_PLL_OUT clock for streaming in a typical pipelne application.

Any suggestions or links or code snippet would be appreciated.

Best Regards,

Ashwath

over 12 years ago

0 Margarita Gashova over 12 years ago

TI__Guru* 80190 points

Hello,

If it is possible it is not tested.

You could check here for documentation regarding GstClock http://gstreamer.freedesktop.org.

Best Regards,

Margarita

0 ashwath hebbar over 12 years ago in reply to Margarita Gashova

Intellectual 515 points

Hi Margarita,

Thanks for the reply. Let me go through that and get back to you in case of query. Can you share any link which has got ptpdv2 open-source code explanation.

Best Regards,

Ashwath

0 Margarita Gashova over 12 years ago in reply to ashwath hebbar

TI__Guru* 80190 points

Hello,

ashwath hebbar said:
an you share any link which has got ptpdv2 open-source code explanation.

Check this topic for Stellaris regarding ptpdv2:

http://e2e.ti.com/support/microcontrollers/stellaris_arm/f/471/p/45856/164075.aspx

But as I said I am not sure is it possible.

Hope this helps.

Margarita

0 ashwath hebbar over 12 years ago in reply to Margarita Gashova

Intellectual 515 points

Hi Margarita,

Thanks for the info. Let me go through that and check once.

0 ashwath hebbar over 12 years ago in reply to ashwath hebbar

Intellectual 515 points

Hi Margarita,

This link has good info. http://ptpd.sourceforge.net/doc.html

Regards

Ashwath

Processors

Processors forum

How to change gstreamer clock to VIDEO0_PLL_OUT clock