TMS320C5505 USB bootloader

Ramanathan Subramaniam

Other Parts Discussed in Thread: TMS320C5505, TMS320C5515

Hi,

This's Ramanathan,i'm doing final year project in TMS320C5505 for this i need a standalone DSP board with flash.Newbee in DSP and i need a help to develop circuit and corresponding bootloader.please guide me.

regards

Ramanathan.S

over 12 years ago

0 Steve Tsang over 12 years ago

TI__Mastermind 23785 points

You can look into C55xx ezDSP. They are have SPI interface to flash. Go to www.ti.com to look for C5505 ezDSP, C5535 ezDSP and C5515 ezDSP.

Regards.

0 Hide35551 over 12 years ago

TI__Expert 3670 points

Ramanathan.S-san,

You do not need to write bootloade.

You need to write a ROM in a format in accordance with the following documents.

Using the TMS320C5515/14/05/04 Bootloader (Rev. A)
http://www.ti.com/litv/pdf/sprabd7a
p.7 3.1 Unsecure Boot Image Format

I think that circuit diagram in following site going to be a reference.

· EVM5505 (Revision D) Support
http://support.spectrumdigital.com/boards/evm5505/revd/

Best Regards,
Hideaki Maeda

Processors

Processors forum

TMS320C5505 USB bootloader