DM385 with OV sensor

selvam mk

Hi all,

We are using DM385 and integrated with 10bit OV sensor to it. And we are able to capture RAW image from DCC tool, it looks more clear as image attached below.

And below is the output on the HDMI display, missing some of the color information.

Can any one tell me what would be the problem for this.

Regards,

Manoj

over 12 years ago

0 Rajat Sagar over 12 years ago

TI__Expert 8780 points

Check the CCOLP (color pattern) configuration register. It seems that color pattern configuration and possibly gains for RAW>YUV conversion (IPIPE, ISIF) may be wrong.

Regards

Rajat

0 selvam mk over 12 years ago in reply to Rajat Sagar

Intellectual 970 points

Hi Rajat,

Input to ISIF module is 16 bit, since we are using 10 bit sensor how to select the "16-to-16-bit selection"

out off 16 bit C_DATA [15:0] data, we have selected "C_DATA[9:0] 000000" i.e GWDI=6. Is it correct for 10 bit sensor ?

Regards,

Manoj

Processors

Processors forum

DM385 with OV sensor