• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 97 subscribers
  • Views 554 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Capturing YUV image with DCC tool from TI8127 via Ethernet

VISHWANATH RAJU
Prodigy 100 points

Hi,

I am facing a problem in DCC tool to view the captured images with YUV player.

When i am trying to open captured image is not properly viewed.

I am using the TI8127 IPNC RDK having camera, HDMI & Ethernet, capturing image in PC with DCC tool via Ethernet.  After capturing image i am trying to open with YUC player its not viewed properly.

But, same image is properly displaying on HDMI.

As per my understand their may be a data loss when any image is transfered through Ethernet directly with out ssh.

Here i am attaching raw & yuv images.

  • 0
    TI__Expert 8780 points

    You need to check the format of YUV image that is being captured.

    The format will depend on the usecase which is running on IPNC and accordingly it can be YUV422 or YUV420SP.

    Regards
    Rajat 

  • 0 in reply to Rajat Sagar
    Prodigy 100 points

    Hi Rajat Sagar,

    Thanks for your fast response.

    I tried to open in both formates by changing the settings in YUV player.

    I am using TI8127 IPNC RDK3.5, Sensor J003, DCC tool. Unable to view the captured image with YUV player.

    Please suggest me how to capture image in host PC with DCC tool and view through YUV player.

    Here i am attaching the images which i captured and compressed tar and zip formats.

    2350.Images.zip