OMAP5432 EVM Schematics (Who to contact)

Brad Epperson

Hello,

I need to know who I can contact about getting an NDA signed with TI so I can get OMAP5432 EVM schematics for reference of my design. Can someone provide a name/email/phone (anything) that I can get a hold of someone from the correct department to get the information I need?

I have tried emailing (No help). I have tried calling (No help).

I need this quickly so I can complete my design and get the next steps started so I can get a prototype of my design built.

Regards,

Brad Epperson

over 11 years ago

0 Yordan Kovachev over 11 years ago

TI__Guru**** 161600 points

Hello,

Have you tried the customer support centers shown in TI website. Here are their links:

http://www.ti.com/ww/en/csc/support-Americas.html - for North, South, & Central America

http://www.ti.com/ww/en/csc/support-Asia.html - for Asia

http://www.ti.com/ww/en/csc/support-EMEA.html - for Europe, Middle East & Africa

http://www.ti.com/ww/en/csc/support-Japan.html - for Japan

You can find contact information (emails and phone numbers) in the above links.

Best Regards,

Yordan

0 Brad Epperson over 11 years ago in reply to Yordan Kovachev

Prodigy 40 points

Yes I did, and here is the result of that.

The original message was received at Tue, 24 Sep 2013 11:31:26 -0500 (CDT)
from arroyo.ext.ti.com [192.94.93.40]

   ----- The following addresses had permanent fatal errors -----
<OMAP-kb-feedback@list.ti.com>
    (reason: 550 5.1.1 <OMAP-kb-feedback@list.ti.com>... mailing list 'omap-kb-feedback' does not exist.)

   ----- Transcript of session follows -----
... while talking to dlep60.itg.ti.com.:
>>> DATA
<<< 550 5.1.1 <OMAP-kb-feedback@list.ti.com>... mailing list 'omap-kb-feedback' does not exist.
550 5.1.1 <OMAP-kb-feedback@list.ti.com>... User unknown
<<< 503 5.0.0 Need RCPT (recipient)

0 Yordan Kovachev over 11 years ago in reply to Brad Epperson

TI__Guru**** 161600 points

Hello Brad,

I am sorry for the delayed response.

The contacts I gave you are the only once, to my knowledge, for obtaining NDA agreement. The other possibility is to direct this question to your local FAE.

Have you tried contacting SVTRONICS (they are the manufacturers of OMAP5 uEVM board)?

Best Regards,

Yordan

0 Nikolaus Schaller over 11 years ago in reply to Yordan Kovachev

Intellectual 330 points

I have purchased an OMAP5 EVM now and I am also trying to get the schematics for a better understanding of the hardware.

SVTRONICS says: "Please contact TI thru their E2E forum for the schematics. We are not authorized to share the schematics".

Obviously we have to contact someone within TI, but whom?

BR,

Nikolaus Schaller

0 Nikolaus Schaller over 11 years ago in reply to Brad Epperson

Intellectual 330 points

Same for me.

Maybe TI should fix that E-Mail link.

It occurs when using the form at http://www-k.ext.ti.com/sc/technical-support/email-tech-support.asp

0 Yordan Kovachev over 11 years ago in reply to Nikolaus Schaller

TI__Guru**** 161600 points

Hello,

I am checking this internally and will come back when I have clear answer.

Regards,

Yordan

Processors

Processors forum

OMAP5432 EVM Schematics (Who to contact)