How to obtain CCS3 feedback (as mentioned in SPRABF2)

Vitalii Kukush

Dear E2E Community!

How and where can I see the results of the compiler feedback? (as mentioned in SPRABF2 "Introduction to TMS320C6000 DSP Optimization") I use the Code Composer Studio 3.3. I try to analyse a non-RTOS projet. Build options -k and -mw are already set.

Thank You for any advice!

Best regards, Vitalii

over 11 years ago

0 Vitalii Kukush over 11 years ago

Intellectual 830 points

I have already found, that feedback information is attached to *.asm file. See comments beginning with "SOFTWARE PIPELINE INFORMATION"

http://processors.wiki.ti.com/index.php/Code_Generation_Tools_FAQ, section "Simple C Tuning".

Will be appreciative for any additional comments! Vitalii

0 Pubesh over 11 years ago

TI__Mastermind 20790 points

Vitalii,

The assembly optimizer helps you optimize your assembly code.
http://processors.wiki.ti.com/index.php/Optimization_Techniques_for_the_TI_C6000_Compiler

Please have a look at the TMS320C6000 Optimizing C Compiler User’s Guide(SPRU187)
You can find the more details of Compiler and/or Assembly Optimizer Feedback at the TMS320C6000
Programmer’s Guide
http://www.ti.com/lit/spru198

Queries on compilers are best handled by C/C++ Compiler Forum.

0 Vitalii Kukush over 11 years ago in reply to Pubesh

Intellectual 830 points

Dear Pubesh!

Thank You very much for these additional links on manuals. They are really very helpful.

Best regards, Vitalii

Processors

Processors forum

How to obtain CCS3 feedback (as mentioned in SPRABF2)