Image Processing in DSP

Hi,

Welcome to the TI E2E forum. I hope you will find many good answers here
In addition you can find some details through the TI.com documents and the TI Wiki Pages.
Be sure to search those for helpful information and to browse for the questions others may have asked on similar topics.
You can find the answer from the below threads, please have look at the mentioned links.
http://e2e.ti.com/support/dsp/tms320c6000_high_performance_dsps/f/112/t/141481.aspx
http://e2e.ti.com/support/development_tools/code_composer_studio/f/81/t/48684.aspx
http://www.ti.com/lit/spra894

Hi Shival,

TI does not provide a pattern recognition library for the C6000 DSP but if you have C code, you can easily cross compile it for the C6000 DSP using the TI code generation tools.

Matlab used to support generation of code for the C6000 DSP couple of years back but you will have to check on the Mathwork forums for existing offering in MATLAB to support the C6000 DSP.

Regards,

Rahul

As for image processing in DSP, i googled this help document (http://www.ti.com/lit/ug/spruf30a/spruf30a.pdf). Not sure whether it help with your image processing issue. Just have a look.