• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 99 subscribers
  • Views 314 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

FFTC-LTE Frequency Shift Enabling

Madhu K
Prodigy 100 points


Hi All,

I enabled the LTE Frequency Shift (7.5 KHz) option in the FFT Co-processor and followed the suggestion found on the same forum such as setting up the parameters n, n0, a, m.

More specifically, my example program set with 1024 point IFFT and for this case:

n = 1024, no =0, a = 2^3, m = 16384. Here I'm trying to match the results against Matlab generated data, but it is not matching. Am I missing anything here to configure the Co-processor. Your help will be appreciated.

Thanks

Madhu K