[OMAP3530] x-loader support for MT29C2G24 flash

John F.

Other Parts Discussed in Thread: OMAP3530

Hello,

Does x-loader support Micron MT29C2G24MAKLACG-6 POP memory?

Running x-loader with a JTAG on a custom 3530 board, I get zeros for both the NAND manufacturer and part IDs (so the nand_chip() function fails). I can read and write to POP RAM, and the GPMC registers don't seem to show any errors.

Thanks,

John

over 16 years ago

0 peng jiang over 13 years ago

Prodigy 30 points

Have you find the fact whether omap3530 support MT29c2g24malkacg-6 or not?

We have designed a board according to beagleboard, it used MT29c2g24malkacg-6 , but it seems that it does not work.

Please contact me

jiangpeng6430@gmail.com

thanks

0 Jeff Culverhouse over 13 years ago in reply to peng jiang

TI__Genius 9190 points

Hello,

I can't find that part number on Micron's site, but it should work if it is Micron. Are you having problems with the mDDR or the NAND?

Processors

Processors forum

[OMAP3530] x-loader support for MT29C2G24 flash