• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 99 subscribers
  • Views 242 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Sharp LCD on OMAP3503

Subash Bose
Prodigy 160 points

Other Parts Discussed in Thread: OMAP3503

Hi,

We are using Sharp 7" LCD (LQ070Y3DG1A) for OMAP3503 board. I need some inputs on

how to configure the contrast ratio. Anyone had worked on this, else have any idea

on how this will impact the driver?

 

Thanks & Regards,

-Subash

  • 0
    TI__Expert 5000 points

    Hi,

    Did you check the V4L2 ioctl support for changing contrast, brightness, saturation etc. There is a set control V4L2 ioctl which you can call with the required control id(say contrast or saturation etc) to change the display parameters.

    Thanks,

    Prathap.