Beagle board ubuntu

dibin moolakadan1

Expert 1180 points

Hi All,

Am using ubuntu on beagle board.

I want to remove the x11 Desktop from the filesystem and want to run matrix GUI at startup

Can any one point me how to do it.

1. Remove x11 Desktop

2. Staty matrix GUI

Regards,

Dibin

over 11 years ago

0 dibin moolakadan1 over 11 years ago

Expert 1180 points

Hi ,

can any one help to install TI matrix-gui in beagleboard ubuntu??

Regards,

Dibin

0 nikunj.rudani over 11 years ago

Expert 1990 points

you can download source code for matrix gui V1, which is QT based version, and cross compile it, other alternative is, you can make similar QT project working on your ubuntu X-11 desktop.

here Ti wiki for matrixGUI version 1

best luck

0 dibin moolakadan1 over 11 years ago in reply to nikunj.rudani

Expert 1180 points

Hi Nikunj,

Thakyou very much for your response ,

Can you point me how to remove the X-11 desktop , and run Matrux only As in TI Sitara linux

Regards,

Dibin

0 nikunj.rudani over 11 years ago in reply to dibin moolakadan1

Expert 1990 points

psychocats has one outstanding blog on this topic, please look at: http://www.psychocats.net/ubuntu/puregnome

best luck

Processors

Processors forum

Beagle board ubuntu