• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 98 subscribers
  • Views 363 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Finger print sensor development kit (TMDXBDKFP5515):

syed hamad
Expert 1120 points

Hi Guys,

Pls help me out with below ,

1. Can the FDK communicate with our device over UART(TTL)?
2. What is the debugging interface with CCS? is it only through XDS100?
3. Can we get the finger print sensor algorithms, drivers etc in the form of source code.

 

regrads,

syed hamad

  • 0
    TI__Intellectual 840 points

    Syed,

    In line with the notice on our wiki page: C5000_Fingerprint_Kit

    Effective immediately, TI has decided to terminate the C5515 Fingerprint Development Kit. This decision is predicated upon Authentec’s decision to discontinue production of the ATW310 swipe sensor, a fundamental component of this kit. TI has no plans to replace the fingerprint development kit with an alternative solution at this time. Customers interested in an alternative solution may contact Tooan directly at business@tooan.cn. We apologize for any inconvenience this may cause and we thank you for your continued interest in our products.


    Regards.

  • 0 in reply to Jon M
    Expert 1120 points

    Hi Jon,

    Is their any alternative method so that i can proceed futher in my design,

    regards,

    syed hamad.