• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 302 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

using xds100v2 with the tms320c6713dsk

Jeffrey White
Prodigy 40 points

Hi,

I'm trying to use the full version CCS5.5 instead of the DSK version. I have an XDS100v2 usb emulator. When I try to make a new target configuration after saying I have the XDS, I don't get either the raw chip or the XDS as selections. 

Is there a way to use the full CCS5.5 with the DSK?

  • 0
    TI__Guru* 84110 points

    Jeffrey,

    When I went to the TI Wiki Pages and searched for XDS100v2, I went to that Wiki page. In that article, you can click on the XDS100v2 Features to find a list of supported processors. You may also want to contact the vendor from whom you bought the XDS100v2 to confirm their support features.

    Sorry that your device is not on the list from the Wiki. I doubt that it would be missing there if available from your emulator vendor, but it should be worth a try. Please let us know what you find out, either way.

    Regards,
    RandyP