• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 179 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[OMAP3530] linux side EDMA configuration...

sureshkumar8095
Intellectual 510 points
Other Parts Discussed in Thread: OMAP3530

Hi all,

         I am presently working on OMAP3530 EVM.

         By configuring the DMA registers in CCS, EDMA is working fine. The same example if i put in Codec Engine Framework, it is building fine but it is not able to transfer the data. What may be the problem regarding this? My requirement is to transfer the data within IVA2.2 itself.

Is it necessary to use the DMAN3 and IRES modules?

         In framework components, fastcopy project (non algorithm transfer ) deals only with QDMA transfer. I need to configure EDMA. What is the possible way to do this?

Thanks and Regards,

SKCV