programming an omap-L138 chip

Kivanc Hedili

Other Parts Discussed in Thread: OMAP-L138, OMAPL138

Hi,

We are planning to design a new product using omap-L138 processor. We will first buy a development board or an evaluation module and build a proof of concept lab prototype but eventually we have to use the omap chip just by itself in our actual product, on our own board. I couldn't find anything about loading a compiled program to a processor chip. Can it be done with a development board or an evaluation module?

Thanks

over 12 years ago

0 Sivaraj Kuppuraj over 12 years ago

TI__Mastermind 35645 points

Hi Mehmet,

Thanks for your post.

Yes, it is possible to load a compiled program to OMAPL138 chip using EVM's or development boards.

Please refer the below resource wiki links which would be useful for you to decide upon:

http://processors.wiki.ti.com/index.php/How_to_connect_to_the_OMAP-L138/C6748/AM1808_EVM_board_using_CCS%3F#Connection_errors_using_CCSv4_and_XDS100

http://processors.wiki.ti.com/index.php/Getting_Started_Guide_for_OMAP-L138#Building_software_components

For designer's resource, you shall use the below:

http://processors.wiki.ti.com/index.php/OMAP-L138_designer%27s_resource_guide#S.2FW.28including_driver.29.C2.A0designer.27s_resource

http://processors.wiki.ti.com/index.php/OMAP-L138_Software_Design_Guide

Also, there are Starterware support available for OMAPL138, you can best utilize the sample examples to build and run applications on OMAPL138 chip:

http://processors.wiki.ti.com/index.php/Quick_Start_Guide_StarterWare_01.10.XX.XX_%28supports_OMAPL138%29

Thanks & regards,

Sivaraj K

-------------------------------------------------------------------------------------------------------

Please click the Verify Answer button on this post if it answers your question.
--------------------------------------------------------------------------------------------------------

Processors

Processors forum

programming an omap-L138 chip