Building and loading a program in release mode

Hi Sabitha,

Using CCS, you can build the project in both Debug or Release mode by setting the "build configurations". i.e., right click the project --> Build configurations-->Set Active --> Release. 

As per this settings, building and loading will happen accordingly.

In addition, I would recommend you to go through the following CCS links.

http://processors.wiki.ti.com/index.php/Projects_and_Build_Handbook_for_CCS

CCS Training: http://processors.wiki.ti.com/index.php/Category:CCS_Training

Workshops: http://processors.wiki.ti.com/index.php/Category:Code_Composer_Studio_v5#Workshops

Video Tutorials: http://processors.wiki.ti.com/index.php/Video_Tutorials_CCSv5

Regards,

Shankari.

-------------------------------------------------------------------------------------------------------

Please click the Verify Answer button on this post if it answers your question.
--------------------------------------------------------------------------------------------------------