Dual display in Omap-L138

pc loh

Prodigy 20 points

Other Parts Discussed in Thread: OMAP-L138, OMAPL138

Does Ti have any evaluation board using omap-L138 with two displays connected LCDC?

over 11 years ago

0 Raja over 11 years ago

TI__Guru* 81335 points

Hi pc loh,

Moved your thread to OMAP-L1x Forum for appropriate response.

Thanks.

0 Mukul Bhatnagar over 11 years ago

TI__Guru* 83815 points

Hi PC Loh

Please clarify what you mean by two displays connected to LCDC? Is the intent to have 2 LCDs using LIDD mode with CS0 and CS1 etc?

There is no TI EVM with dual LCD display for this device.

Regards

Mukul

0 pc loh over 11 years ago in reply to Mukul Bhatnagar

Prodigy 20 points

Hi Mukul,

Yes, Is there any Evaluation board has 2 LCD connect to LIDD mode with CS0 and CS1? Or any TI device with same configuration.

0 Mukul Bhatnagar over 11 years ago in reply to pc loh

TI__Guru* 83815 points

I am not aware of any OMAPL1x based eval board with 2 LCD connected via LIDD mode.

AM335x has an LCD module which is an upgraded version of the one on OMAPL138, as far as I know they too do not have any eval platform with this feature/

From a spec point of view I believe it is doable. If you have any additional specifics, I can request the LCD experts on the team to evaluate your design proposal etc.

Regards

Mukul

Processors

Processors forum

Dual display in Omap-L138