different OSD display output

You mean you have single swms output fed to two displays and you want to have different OSD content ?

This is not possible since it is the same output buffer

It is better to use independent grpx planes to apply OSD on video via fbdev

i am  sorry .i don't say my situation clearly.

now my link is like that 

                                          ->swms[0]->OSD->display

cap ->enc->dec->dup-                       

                                         ->swms[1]->display

i want to put the OSD link after swms[1] also,and i want to make the two OSD content is different?

so how can i do?

Answered in this thread:http://e2e.ti.com/support/dsp/davinci_digital_media_processors/f/717/p/303306/1057320.aspx#1057320

hi Badri ,thanks for your answer.if like you say that construct link following:

cap ->enc->dec->swms0                                           -->dis0

                                          -> merge -> osd->select

                          -> swms1                                         --> dis1

the two output will display the same OSD content?my opition is the that i can control that for example,

the OSD of dis0  is A,the OSD of the dis1 is B,they are independently

In the chain above osd link will have two channels input and they can have independent content.You will have to provide separate grpx plane to osd channel 0 and 1.Refer link api documentation