AM335X WinCE7 USB device functionality

Srinivasa Rao Samineni1

Other Parts Discussed in Thread: AM3354

Hi,

We are using "BSP_WINCE_ARM_A8_02_30_00" version BSP for AM3354 processor board. We are facing issues in USB OTG in peripheral mode, from BSP release notes also it is not clear whether the functionality is fully supported.

Can some one please let me know if there are any existing issues in the USBFN module.

Thanks.

Srinivas

over 12 years ago

0 John Reid over 12 years ago

Intellectual 610 points

Are you trying to use device functionality on USB0 or USB1?

The BSP does not support USB1 device functionality as described in the BSP User Guide. If you need to use it on USB1, then I have written guidance in the following post on how I managed change the BSP USB Driver code to do this:

http://e2e.ti.com/support/embedded/wince/f/353/t/251892.aspx

Can you say what problems you are actually having?

Regards

John

0 Srinivasa Rao Samineni1 over 12 years ago in reply to John Reid

Prodigy 50 points

Thank you so much John.

I am trying for USB1 device functionality and from past couple of days i am trying to get it worked. You have made my job simple by giving good solution for this issue.

Regards,

Srinivas

0 John Reid over 12 years ago in reply to Srinivasa Rao Samineni1

Intellectual 610 points

I am glad my post helped someone out so quickly after I made it.

Processors

Processors forum

AM335X WinCE7 USB device functionality