• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 165 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AD read enable pin trigger the edma transfer

juzheng zhang
Prodigy 130 points

Hello

         I  want to relize the AD read enable pin trigger the edma transfer, but I am not sure that whether the cpu read enable  signal is the same with the edma read enable signal and how I know it ?

 Thank you !

  • 0
    TI__Guru* 84110 points

    Juzheng Zhang,

    All the information on the EMIF pins will be included in the EMIF User Guide and the device's datasheet. All of the information on the EDMA will be included in its User Guide and the datasheet.

    An AD read enable pin does not immediately come to mind. Perhaps you will identify the device with which you are working?

    Regards,
    RandyP