• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 152 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MMC4.41 CRC7

Jianxuan
Intellectual 630 points
Hi, In MMC4.41, commands need to be checked by CRC7. I want to know CRC7 should check for bit47 to bit8, or for bit45 to bit8. Thanks, Jianxuan