How to burn prebuilt image of android on beagleboard

Kanchan

Hiii,

i have successfully ported prebuit image of android on SD card and made the partition. but now i want to put that sd card in my beagleboard-rev-c4. so how to proceed further. is there any sequence of commands which should be followed??

can you suggest me the links or the steps to be followed? how to built that image on the beagleboard?

plzz plzz help me out.

thanking you

over 11 years ago

0 Pankaj Bharadiya over 11 years ago

TI__Expert 5400 points

Hi,

Board should boot automatically once you insert a prebuilt SD card and power on.

U-boot will read boot.scr script present in SD card boot partition and set board configuration accordingly.

In case you are facing any issues, please try with the prebuilt image present at below link (Under Prebuilt-Images section)

http://software-dl.ti.com/dsps/dsps_public_sw/sdo_tii/TI_Android_DevKit/TI_Android_GingerBread_2_3_4_DevKit_2_1/index_FDS.html

Thanks and Regards,

Pankaj Bharadiya

Processors

Processors forum

How to burn prebuilt image of android on beagleboard