• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 98 subscribers
  • Views 260 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

START_HERE.sh not found

Jiajin An1
Prodigy 130 points
I bought a BeagleBone Development Board from TI eStare (Order Number is 258705) on 7/31/2013. From I found the following: When Beaglebone boots, a START_HERE directory will display on your Linux host desktop. To start your evalaution and development using the BeagleBone, Run the START_HERE.sh script. I tried to follow the above instruction. The Host PC OS is Ubuntu 12.04.1 LTS. I use the following command from a Ubuntu terminal to connect Beaglebone to the host: sudo screen /dev/ttyUSB1 115200 Then I can see the BeagleBone boots, then I can login to root. At the same time I can see a BEAGLE_BONE directory display on Ubuntu desktop. However, I can never see a START_HERE directory. Of course, there is no START_HERE.sh script either.
  • 0
    Prodigy 130 points
    I bought a BeagleBone Development Board from TI eStare (Order Number is 258705) on 7/31/2013. From Sitara Linux Software Developer’s Guide I found the following: When Beaglebone boots, a START_HERE directory will display on your Linux host desktop. To start your evalaution and development using the BeagleBone, Run the START_HERE.sh script. I tried to follow the above instruction. The Host PC OS is Ubuntu 12.04.1 LTS. I use the following command from a Ubuntu terminal to connect Beaglebone to the host: sudo screen /dev/ttyUSB1 115200. Then I can see the BeagleBone boots, then I can login to root. At the same time I can see a BEAGLE_BONE directory display on Ubuntu desktop. However, I can never see a START_HERE directory. Of course, there is no START_HERE.sh script either.
  • 0 in reply to Jiajin An1
    TI__Guru**** 393215 points
    Beaglebone is supported by the community at www.beagleboard.org.
  • 0 in reply to Biser Gatchev-XID
    Prodigy 130 points

    I asked the same question to the community at www.beagleboard.org.

    They told me The board does not ship with the Sitara SDK. That is why I cannot see the START_HERE directory.

    Where I can download the SD card that include the Sitara SDK installer?