Dual MAC on AM335x starterkit

Zeeshan Aslam

Hi,

How to get Tx/Rx interrupts on CPDMA channels from 1 to 7? Channel 0 interrupts are working fine. what's up with rest of channels.

Thanks,

Zeeshan Aslam

over 11 years ago

0 Biser Gatchev-XID over 11 years ago

TI__Guru**** 393215 points

Hi Zeeshan,

What software are you using? The CPDMA RX and TX Interfaces are described in section 14.3.2.4 of the AM335X Technical Reference Manual, Rev. I. See also sections 14.5.2.20-23 and 14.5.2.26-29.

0 Zeeshan Aslam over 11 years ago in reply to Biser Gatchev-XID

Prodigy 150 points

Hi Biser,

I am developing my own Dual MAC driver. I have referred those sections you mentioned but setting interrupt enable bits in all those sections doesn't make any difference.

Thanks,

Zeeshan

Processors

Processors forum

Dual MAC on AM335x starterkit