DSP library for C66x: cycle counts?

Nikos Annitsakis

Prodigy 10 points

Is there any document containing formulas calculating the cycle count for the DSP functions contained in the

DSP library for the C66x?

(There is a DSPLIB.chm document in the download page of the library, but it does not contain cycle counts.

On the other hand, the DSP library manuals for other DSP cores contain formulas for cycle counts)

over 12 years ago

0 Raja over 12 years ago

TI__Guru* 81335 points

Hi Nikos,

Texas Instruments (TI) offers simulator, also known as an instruction set simulator, is a software tool for developing application/algorithm programs on TI’s DSPs. Simulators are an excellent platform for application development because they provide greater visibility into application behavior, are readily available, and are easy to use. Additional simulator characteristics that are critical to application development are simulation speed(cycle count), simulation accuracy, and the ability to run complete applications.

http://processors.wiki.ti.com/index.php/Category:Simulation

Please refer below thread which may help you to find cycle counts.

http://e2e.ti.com/support/development_tools/code_composer_studio/f/81/t/114580.aspx

Thanks.