[U-Boot] USB1 Fastboot

Markus F.

Other Parts Discussed in Thread: AM3354

Hi all,

in our custom board, we want to use USB1 as peripheral to use fastboot.

In the U-Boot (U-Boot 2013.01.01) I changed the USB Base Address to 0x47401800, after loading U-Boot SW and starting fastboot, Windows don't recognize any new Hardware.

My Question is, do I need to change anything else to use USB1 as peripheral and use fastboot? Maybe I need to change something in the fastboot sources?

Thanks for the help.

Best Regards,

Markus

over 11 years ago

0 Biser Gatchev-XID over 11 years ago

TI__Guru**** 393215 points

Hi Markus,

What processor is this? This question also seems Android related. There is a dedicated Android forum: http://e2e.ti.com/support/embedded/android/default.aspx. Recommend to post your question there.

0 Markus F. over 11 years ago in reply to Biser Gatchev-XID

Prodigy 165 points

Hi Biser,

thanks for your reply, i will post it in the other forum.

It's the AM3354 processor.

Best Regards,

Markus

Processors

Processors forum

[U-Boot] USB1 Fastboot