• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 97 subscribers
  • Views 443 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[SOLVED] AM335x display problem using WINCE 7??

Vijay Partap Singh Salathia
Intellectual 470 points

Hello Friends,

 I am working on AM335x BSP uinsg WINCE 7. AM335x provides default support for 7 inch lcd. I have selected the required Catalog items from the Catalog Items. But, after loading the desktop, it hangs after 6-8 sec... What should be the reason for this, I am confused for this.... And more over... touch is also not working.. The touch calibration is coming on the screen and i touch the screen at different co-ordinates and after doing this, it again comes in the center of the screen and i have to repeat the steps of co-ordination again and again............. 

I am missing something in the Catalog Items. Anyone can tell me what should i need to select from Catalog for proper display and touch

  • 0
    Intellectual 470 points

    hi,

    The basic catalog selection for AM335x display is as -

    SYSGEM_QVGA

    SYSGEN_STANDARDSHELL

    and your LCD Display Driver variable ..

    And in my case the system was hanged after some seconds. To solve this issue Please have a look on this link -- 

    http://social.msdn.microsoft.com/Forums/en-US/90d6ba74-c797-40f8-b52d-563ad7ded23f/solved-what-is-the-basic-catalog-item-selection-for-lcd-display-of-7-inch-for-am335x-bsp?forum=winembplatdev#28c81294-facf-411e-bfb6-68014c01c000