Web server

Bindu Ganesh

Other Parts Discussed in Thread: SYSBIOS

HI,

Please find below link, Example “ EnetLWIP_sysbios” (Web server ) http://processors.wiki.ti.com/index.php/AM335x_SYSBIOS_Industrial_SDK_01.01.00.03_User_Guide

We tried to connect the TI ICE Board with address ( http://192.168.1.2), But we were not able to establish the connection with TI ICE

Below is the procedure we followed

1) Project EnetLWIP_sysbios was in Debug mode

2) Connected ICE Board with internet explorer with http://192.168.1.2

Can any one guide us how can we implement the web server application into Ethercat application (example to control the I/O)

over 11 years ago

0 Frank Walzer over 11 years ago

TI__Mastermind 44306 points

Bindu,

are you using ICEv2?

Also make sure your network cable is already connected at startup. The example is very simple and the (fixed) IP does not get assigned if there is no link.

I don't understand the reference to EtherCAT example. You can't combine a TCP/IP stack such as lwIP with EtherCAT easily...

Regards,

0 Bindu Ganesh over 11 years ago in reply to Frank Walzer

Expert 2220 points

Hi Frank,

we are using ICE v1

Regards,

bindu

0 Frank Walzer over 11 years ago in reply to Bindu Ganesh

TI__Mastermind 44306 points

I don't think the lwIP example works on ICEv1 as this does not have CPSW MII connections...

Processors

Processors forum

Web server