nvr gui

cherish

i use DVR4.00,nvr on 8168.

i exec run_gui.sh，but in my monitor（ti is matched with 8168evm from ti），it can not display the whole interface for gui.

it just display a part of the gui interface.and it cannot display video from my IPCamera.i am sure my IPCamerais good ,i used VLC play the video from IPCamera.

monitor display picture

the log from serial terminal is below.

8037.114session.log

best regards.thanks

over 11 years ago

0 Sivagamy Govindasamy over 11 years ago

TI__Expert 6950 points

Looks like one or more threads handling rtsp input has already crashed. Are you able to any GUI operation like adding new URL?

0 cherish over 11 years ago in reply to Sivagamy Govindasamy

Intellectual 870 points

thanks for your answer

no i can not .i have a question,

in the NVR GUI demo,the default url is:

define NETWORK_URL_DEFAULT "rtsp://172.24.190.138:8557/PSIA/Streaming/channels/2videoCodecType=H.264"

but i use a IPNC,its url is :rtsp://admin:12345@192.168.1.246:554/h264/ch1/main/av_stream

i changed it.

is it right ?is the formate of url must be the formate as the default in the demo.

best regards

Processors

Processors forum

nvr gui