getting image input to the matlab simulink model through ccs v3.1 compiler

Mukesh Kumar Jena

i am using dsk6713 board with a daughter card vm3224k2 interfaced to it. I am trying to burn programs through simulink(matlab) via ccsv3.1.

normal Led blinking operations are working fine through matlab.But i dont know how to read the image input from the daughter card in simulink blockdiagram operations..please suggest me

over 11 years ago

0 a rajib kumar gupta over 11 years ago

Prodigy 145 points

i do also have the same problem...

0 Pubesh over 11 years ago in reply to a rajib kumar gupta

TI__Mastermind 20790 points

Hi,

Please check the boot.asm file for your own application image burn and boot from flash.
FLASH_START   .equ    0x90000400        ;flash start address
CODE_START    .equ    0x00000400        ;start of non boot code
CODE_SIZE     .equ    0x00003000        ;application code size in byte

You can use the FlashBurn application(FBTC6713) to program the on-board flash memory.
This wiki article will help you for how to flash the C6713 device board.
http://processors.wiki.ti.com/index.php/Flashing_the_C6713_EVM

SimuLink is not a product of TI. Please contact MathWorks to get support for using the MatLab program for generating code for the TI DSP. And also read this thread for MATLAB/Simulink.
http://e2e.ti.com/support/dsp/tms320c6000_high_performance_dsps/f/115/p/117626/462051.aspx#462051

Processors

Processors forum

getting image input to the matlab simulink model through ccs v3.1 compiler