Query related to MPM and CCS

Vishal Ingulkar

Intellectual 430 points

Other Parts Discussed in Thread: TCI6636K2H

Is it possible to debug dsp using CCS when its downloaded through MPM on keystone2 6636k212 architecture ?

I am usin ARM SPI boot mode.

If Yes , can anyone please share procedure ?

Regards,

Vishal

over 11 years ago

0 Vishal Ingulkar over 11 years ago

Intellectual 430 points

Target chip : TCI6636k2h

Target EVM : XTCIEVMK2X Rev1.1

CCS ver : CCS 5.4.0.00091

MCSDK version:

mcsdk_bios_3_00_01_12

mcsdk_linux_3_00_01_12

0 desouza over 11 years ago in reply to Vishal Ingulkar

TI__Guru**** 171004 points

Hi,

I am forwarding this to the Keystone forum as they are much more knowledgeable about their software package and the device debugging capabilities.

Best regards,

Rafael

0 Raja over 11 years ago in reply to desouza

TI__Guru* 81335 points

Hi Vishal,

I think it is possible to connect and debug dsp core using CCS after MPM download. Please refer below link.

http://processors.wiki.ti.com/index.php/MCSDK_UG_Chapter_Developing_System_Mgmt#Loading_DSP_images_from_CCS_.28without_using_MPM.29

Have you tried connecting to the DSP through CCS "Debug As -> Code Composer Debug Session"?

In the meantime, I will contact some colleagues on my team for their feedback on this.

Thanks.

0 Rex Chang over 11 years ago in reply to Raja

TI__Guru 50170 points

Hi, Vishal,

Please follow Raja's link for DSP debugging. MPM has nothing to do with DSP code debugging. Once you have DSP code working, you can use MPM to download and run it from ARM.

Rex

Processors

Processors forum

Query related to MPM and CCS