TI Board with Nucleus RTOS

Chanchal Joshi

Prodigy 40 points

Other Parts Discussed in Thread: TMDXEVM3358

I have a couple of questions for TMDXEVM3358 - AM335x Evaluation Module (EVM)

· Does this product support Nucleus RTOS?

· If yes, do they also provide nucleus RTOS and development environment with this product?

Actually we need a ARM Cortex based evaluation boards running Nucleus with Development enviroment and NUCLEUS RTOS.

Need help on this.

over 11 years ago

0 Biser Gatchev-XID over 11 years ago

TI__Guru**** 393215 points

Nucleus RTOS is a third-party product, distributed by Mentor Graphics and is not supported by TI. You can turn to http://www.mentor.com/embedded-software/nucleus/ and check if they have BSPs for AM335X boards.

0 Chanchal Joshi over 11 years ago in reply to Biser Gatchev-XID

Prodigy 40 points

Thanks Biser,

I have checked the site ,they have the support for few TI boards as they say.This means I have to purchase Board from TI and then Nucleus RTOS and supporting packages from Mentor Graphics .

Am I right on this.

Also if any technical difficulty occurs,will TI will assist on that as you say its third party and TI doesn't support it.

Regards

Chanchal

0 Biser Gatchev-XID over 11 years ago in reply to Chanchal Joshi

TI__Guru**** 393215 points

The only AM335X board they support is Beaglebone (this is different from Beaglebone Black). At least this is what I see. Beaglebone is supported on http://www.beagleboard.org/. This forum can also help on Beaglebone or AM335X hardware questions.

TI does NOT support the Nucleus RTOS.