24Bit LCD on Am335x

Chad Graham1

Other Parts Discussed in Thread: AM3352

Hello,

I'm looking for help getting a 24bit LCD working on our Am3352 chip. Our board is nearly identical to the beaglebone black and I'm not sure where to begin modifying to get it working. We are currently running the LCD pins directly to our LCD.

over 11 years ago

0 Rogerio Almeida over 11 years ago

TI__Mastermind 26215 points

Chad,

some usefull information here:

http://e2e.ti.com/support/arm/sitara_arm/f/791/t/264290.aspx

http://e2e.ti.com/support/arm/sitara_arm/f/791/t/219564.aspx

http://e2e.ti.com/support/arm/sitara_arm/f/791/p/316246/1099983.aspx#1099983

0 Chad Graham1 over 11 years ago in reply to Rogerio Almeida

Prodigy 170 points

I've taken a look at this and I'm still unsure where to begin. We've deleted the HDMI framer from our device and I'm unsure if I need to change the pinmux, a source file in uboot or if I can make the change from angstrom.

Processors

Processors forum

24Bit LCD on Am335x