• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 99 subscribers
  • Views 244 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Starting with DM368

Tuan Hoang Anh
Prodigy 20 points

Other Parts Discussed in Thread: TMS320DM368

Dear guys!,

Currently, I am running a project which utilizes the TMS320DM368. I am testing the PCB which integrated with this CPU now. At this time, I failed to download the operating system (OS) into this CPU. Could you please let me know the exact procedure of how to download OS into TMS320DM368? Also I would like to know if Bootloader is already available in this CPU. Does it necessary to re-program the firmware for this CPU? Besides, I failed to read the ID of this IC by using J-Link. Please let me know how can I read the ID of this IC?

Could you please help me how to starting with this CPU>

I am looking forward to hearing from you. Thank you so much.

Best regards,

Tuan Hoang

  • 0
    Mastermind 8715 points

    Which software package you are using? Since it is a custom board, some changes might be required in primary bootloader secondary boot loader and Kernel as well. It depends on how you customized your hardware

  • 0 in reply to Ravikiran HV
    Prodigy 20 points

    Thank you for your support.

    I've already finished the hardware. Could you please let me know if the ROM Bootloader (RBL) is already available in the DSP? If RBL does not exist, how can I download this firmware to the DSP. And if it already exist, please let me know the procedure to boot the opetating system

    At this time, I am trying to Boot the operating system via UART interface because it is a simplest way to boot the operating syste, However, I haven't received any data from UART interface. Could you please let me know the exact procedure of how to boot the operating system via UART interface.

    I a, looking forward to receiving you help.

    Best regards.