Problem while working with CCSv4

Arunabha Deb

Other Parts Discussed in Thread: TMS320C5515

Hi everyone,

I am working with ccsv4 for tms320c5515 ezdsp board.My code is debugging without any errors.But while I am trying to see the SPI or system 's registers value then i could find that these values are not at all changing even though I am writing something in the SPI or system's registers.Please help me with this.i am not getting any out put.

Thanks and regards

Arun

over 12 years ago

0 Gautam Iyer over 12 years ago

Guru 192875 points

Arun, the above issue seems like a SPI configuration issue. Can you please check with a sample code and revert?

Regards,

Gautam

0 Arunabha Deb over 12 years ago in reply to Gautam Iyer

Intellectual 710 points

Thanks Gautam for your reply.I tried to check with the example code ti has provided but I am getting the same thing.Then i tried to check the system registers value after loading to a variable,there I am seeing the change as I am doing it in my code.I dnt know what can be the possible reason for that.

Thanks and regards

0 Ki over 12 years ago in reply to Arunabha Deb

TI__Guru**** 480331 points

Hi Arunabha,

I will move this thread to the appropriate device forum where the experts there can help you best.

Thanks

Processors

Processors forum

Problem while working with CCSv4