• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 98 subscribers
  • Views 814 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Importing the U-Boot to Eclipse for customisation

Praveen Hattikal
Prodigy 80 points
Other Parts Discussed in Thread: AM3359

Hi All,

  I am working on AM3359 evaluation board  and using Ubuntu 12.4 as a host  for the development.

I got source code for U-Boot and interested in customising it.

So,
 I am not getting how can i import it to the Ecliplse IDE and Debug it using  Ecliplse IDE.

Somebody tell me the procedure how can i do this

Thanks and Regards

Praveen M H

  • 0
    TI__Guru**** 161600 points

    Hello Praveen M H, 

    You can check the following wiki page (in section Subcategories find the ccs version you are using) regarding CCS getting started guides:
    http://processors.wiki.ti.com/index.php/Category:CCS

    You can also use the dedicated CCS forum: http://e2e.ti.com/support/development_tools/code_composer_studio/f/81.aspx , for more specific CCS queries.

    About the device you are using AM3359, you should write in the appropriate Sitara Processors Forum: http://e2e.ti.com/support/arm/sitara_arm/f/791.aspx

    Best Regards,

    Yordan

  • 0 in reply to Yordan Kovachev
    Prodigy 80 points

    Hi  Yordan,

     Thank you for the quick reply.
      

    Thanks and Regards

    Praveen M H