This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
Am using AM3352 processor & connected 16 BIT address-data multiplexed NOR FLASH
I have used your PINMUX utility tool & found no conflicts
But when referred to the TRM at PAGE 392 & 393, For multiplexed address data 16bit device A0 should not be used & USING A1-27...
Attached please find my AM3352-NOR connections / CONFIG sheet / TRM spec pages 392-393
I ahve used A0-A26... PLease confirm the connections are ok
Thanks & Regards
Jones
Hi Jones,
Your connection are OK. Note that you are not using the latest AM335X TRM Rev. J. Always make sure that you have the latest revision of processor documentation. There are some changes in Table 7-5.