Dm814x EMIF interface

bhavesh bhadricha

In Dm814x there are two EMIF(DDR3) interface each 64 bit,so can we disable one EMIF block and operate using only one EMIF block.

0 Pavel Botev over 11 years ago

Hi Bhavesh,

Yes, you can use only one of these two EMIF (DDR2/3) controllers, but you will loose DDR access performance.

Refer to the below wiki page:

http://processors.wiki.ti.com/index.php/TI814x-DDR3-Init-U-Boot#FAQ

Regards,
Pavel

Processors forum