BeagleBoard-xM Rev C Gel file

Patrick Ingram

Other Parts Discussed in Thread: DM3730

I am working with a beagleBoard-xM rev C2 and trying to develop some new DSP code. I am using a BlackHawk XDS560 USB STE to debug. The basic gel and command files only allow access to the DSPs cache which is pretty limiting. Is there any source for more advanced gel files that will allow access to DDR memory on the DSP?

Thanks,

Patrick

over 11 years ago

0 Cvetolin Shulev-XID over 11 years ago

TI__Guru 65405 points

Hi Patrick,

The OMAP and Sitara CCS support article contains links to .gel files. You can choose one depending on the CCS version which you are using. For the BeagleBoard xM you should choose the DM3730 EVM gel file. I am not sure if there is a specific one for this board but you can try. There is the link:

http://processors.wiki.ti.com/index.php/OMAP_and_Sitara_CCS_support

Give me some feedback whether linked gel file are suitable for the BeagleBoard xM.

Tsvetolin Shulev

Processors

Processors forum

BeagleBoard-xM Rev C Gel file