Throughput of Security Accelerator on Keystone 1

Edwin,

For further information on the SA and SA LLD, please refer to the Keystone Architecture Security Accelerator User Guide at: http://www.ti.com/lit/sprugy6
http://software-dl.ti.com/public/hpmp/KeyStone/09_NETCP_SA/index.html
SA LLD Download Link,
http://software-dl.ti.com/sdoemb/sdoemb_public_sw/salld/index.html
There is no throughput document, but find the some information on the below E2E post.
http://e2e.ti.com/support/dsp/c6000_multi-core_dsps/f/639/p/139071/503141.aspx#503141
http://e2e.ti.com/support/dsp/c6000_multi-core_dsps/f/639/p/309967/1081282.aspx#1081282

Edwin,

Did you get an enough information from the above post?
If You have query on the same, we can discuss so that someone get for the best help.
However this discussion of thread can helpful for future readers, You can verify this thread,If answered.

Does SA LLD 2.00.04.00 continue to support Keystone 1 architecture? We are using C6670.

Thank you,

Edwin Lee 

Edwin,

No, this release will be support for keystone II device. Read the Release notes and SA LLD user guide find more detailed information. This is the 02.00.04.00 release of the SA LLD to be used with KeyStone2 devices.

http://downloads.ti.com/sdoemb/sdoemb_public_sw/salld/02_00_04_00/exports/ReleaseNotes_SA_LLD.pdf

You can use SA LLD 1.00.xx.xx Version for Keystone I device.

http://software-dl.ti.com/sdoemb/sdoemb_public_sw/salld/index.html

Is it the same for the 3GPP enabler too? Should I stick with version 1.00.xx for my Keystone1 device?

Thanks, Edwin Lee