AIF2 update

Supreeth S B1

Hi,

I am trying to configure my AIF2 interface for CPRI in loopback mode with PRBS generation. It seems that the AIF1 user guide(SPRUGV7D—October 2012) has all the required information. Whereas, in AIF2 userguide, many of these registers are removed ( eg. SD RX Configuration Register 2).

Can you please let me know if the loopback option is still applicable as stated in AIF1 user guide?

Thanks,

Supreeth

over 11 years ago

0 Raja over 11 years ago

TI__Guru* 81335 points

Hi Supreeth,

Could you please provide your DSP Part Number?

Thanks.

0 Supreeth S B1 over 11 years ago in reply to Raja

Intellectual 790 points

Hi Rajasekaran,

We are using "TCI6636K2HAXAAWA2" in our design.

Regards,

Supreeth

0 Raja over 11 years ago in reply to Supreeth S B1

TI__Guru* 81335 points

Hi Supreeth,

TCI6638K2H are supported directly through Local Field Applications Engineers (FAEs.) These devices are not supported on the E2E forum. Please contact your local FAE for support of these devices. If you are not sure who your local FAE is, then please contact your local technical sales representative and they will be able to put you in contact with your local FAE.

Thanks.

Processors

Processors forum

AIF2 update